GMCforum: GMCnet » How Do I..??

Home » Public Forums » GMCnet » How Do I..??

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] How Do I..?? [message #328450 is a reply to message #328447]

Sun, 21 January 2018 14:21

emerystora

Messages: 4442
Registered: January 2004

Karma:

Senior Member

Is the floor wood or metal?Get a hole saw with a 3” blade. The pilot drill in the center should be adjustable.
Adjust it so it just sticks out perhaps a quarter inch and start the hole. Once the blade is started it doesn’t need the center bit so back it off more.

This should alllow you to cut the hole without any damage below it

Emery Stora

> On Jan 21, 2018, at 12:43 PM, Johnny Bridges via Gmclist wrote:
>
> I need to cut about a 3" hole in the ratrod floor. Behind this hole is the clutch slave, including its bleeder which I need to get to. The nipple
> currently on it is broken off to clear. In what way might I safely cut the floodboard without hacking up the essentials behind it.
>
> --johnny
> --
> 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> "I forgive them all, save those who hurt the dogs. They must answer to me in hell" - ol Andy, paraphrased
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		How Do I..?? By: jhbridges on Sun, 21 January 2018 13:43
		Re: [GMCnet] How Do I..?? By: emerystora on Sun, 21 January 2018 14:21
		Re: [GMCnet] How Do I..?? By: Bullitthead on Sun, 21 January 2018 15:07
		Re: [GMCnet] How Do I..?? By: Bullitthead on Sun, 21 January 2018 15:13
		Re: [GMCnet] How Do I..?? By: Marsh Wilkes on Sun, 21 January 2018 18:48
		Re: How Do I..?? By: jhbridges on Mon, 22 January 2018 08:55

Previous Topic:	[GMCnet] Electric fuel pump for AOnan genset
Next Topic:	Onan (4K) Priming / Fuel Pump Questions...

Goto Forum:

-=] Back to Top [=-

Current Time: Tue May 14 22:00:17 CDT 2024

Total time taken to generate the page: 0.01472 seconds