GMCforum: GMCnet » Dash Heat/A/C control unit

Home » Public Forums » GMCnet » Dash Heat/A/C control unit

Show: Today's Messages :: Polls :: Message Navigator

Re: Dash Heat/A/C control unit [message #328435 is a reply to message #328418]

Sun, 21 January 2018 09:46

Bullitthead

Messages: 1411
Registered: November 2013

Karma:

Senior Member

Or the molded cable end eye that anchors the cable sheath to the control broke and now the entire cable is moving instead of just the core. You will have to see where it is bent the tightest and relieve that stress, repair the cable end with a P type cable clamp, and attempt to lube the cable with some silicone or other plastic-friendly lubricant. Or get a new/another cable and install it with minimum bending to make the action easier on the AC control assembly.

Terry Kelpien ASE Master Technician 73 Glacier 260 Smithfield, Va.

Report message to a moderator

[Message index]

		Dash Heat/A/C control unit By: Mike Teets on Sat, 20 January 2018 22:16
		Re: Dash Heat/A/C control unit By: Hal StClair on Sat, 20 January 2018 23:54
		Re: Dash Heat/A/C control unit By: Bullitthead on Sun, 21 January 2018 09:46
		Re: [GMCnet] Dash Heat/A/C control unit By: jimk on Sun, 21 January 2018 13:22
		Re: Dash Heat/A/C control unit By: JohnL455 on Tue, 23 January 2018 17:33
		Re: Dash Heat/A/C control unit By: C Boyd on Tue, 23 January 2018 17:50

Previous Topic:	Bullitthead re bath door repair
Next Topic:	replacement interior window trim

Goto Forum:

-=] Back to Top [=-

Current Time: Fri May 10 03:44:54 CDT 2024

Total time taken to generate the page: 0.11784 seconds