GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » hei cap orientation
Re: hei cap orientation [message #328385 is a reply to message #328379] Fri, 19 January 2018 09:04 Go to previous messageGo to previous message
JohnL455 is currently offline  JohnL455   United States
Messages: 4447
Registered: October 2006
Location: Woodstock, IL
Karma:
Senior Member
To elaborate on what Ken H said if your dist has not been serviced then the original lube has offgassed and is now glue. They need to be pulled and disassembled so the stiction can be cleaned off the concentic shafts and relubed. Perfect time to inspect/replace worn parts and reclock correctly. If you are not running a magcore spiral wire set you need to.

John Lebetski
Woodstock, IL
77 Eleganza II
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Ken. Came we have new windshields installed in Amana Iowa in September?
Next Topic: Re: [GMCnet] Ken. Can we have new windshields installed in Amana Iowa in September.
Goto Forum:
  


Current Time: Tue May 14 06:01:49 CDT 2024

Total time taken to generate the page: 0.00781 seconds