GMCforum: GMCnet » Yandina combiner cycles

Home » Public Forums » GMCnet » Yandina combiner cycles

Show: Today's Messages :: Polls :: Message Navigator

Re: Yandina combiner cycles [message #328348 is a reply to message #328345]

Wed, 17 January 2018 11:53

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma:

Senior Member

I just looked at the spec sheet and the instruction manual for this thing and it looks like it would solve your Yandina problem. The cut off and cut in voltages have been lowered enough that it should not cycle.

I forgot to look at the price.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

[Message index]

		Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 09:01
		Re: Yandina combiner cycles By: jhbridges on Wed, 17 January 2018 09:18
		Re: Yandina combiner cycles By: Ken Burton on Wed, 17 January 2018 10:02
		Re: Yandina combiner cycles By: Tomtom on Wed, 17 January 2018 10:38
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 11:05
		Re: Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 11:18
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 11:26
		Re: Yandina combiner cycles By: Ken Burton on Wed, 17 January 2018 11:53
		Re: Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 12:31
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 12:45
		Re: Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 12:55
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 14:56
		Re: [GMCnet] Yandina combiner cycles By: bdub on Wed, 17 January 2018 15:10
		Re: [GMCnet] Yandina combiner cycles By: Ken Henderson on Wed, 17 January 2018 17:40
		Re: Yandina combiner cycles By: RF_Burns on Wed, 17 January 2018 20:42
		Re: Yandina combiner cycles By: midlf on Wed, 17 January 2018 20:37
		Re: Yandina combiner cycles By: jhbridges on Thu, 18 January 2018 09:20
		Re: Yandina combiner cycles By: JohnL455 on Fri, 19 January 2018 11:00
		Re: Yandina combiner cycles By: Tilerpep on Wed, 14 March 2018 09:16
		Re: [GMCnet] Yandina combiner cycles By: Mr ERFisher on Wed, 14 March 2018 09:56
		Re: Yandina combiner cycles By: Matt Colie on Wed, 14 March 2018 19:08
		Re: Yandina combiner cycles By: Hardie Johnson on Sat, 17 March 2018 16:14
		Re: [GMCnet] Yandina combiner cycles By: James Hupy on Sat, 17 March 2018 16:33
		Re: [GMCnet] Yandina combiner cycles By: Hardie Johnson on Sat, 17 March 2018 17:31

Previous Topic:	Window Tinting
Next Topic:	Michigan to Reno trip

Goto Forum:

-=] Back to Top [=-

Current Time: Sun May 19 09:37:51 CDT 2024

Total time taken to generate the page: 0.02506 seconds