GMCforum: GMCnet » Yandina combiner cycles

Home » Public Forums » GMCnet » Yandina combiner cycles

Show: Today's Messages :: Polls :: Message Navigator

Re: Yandina combiner cycles [message #328345 is a reply to message #328344]

Wed, 17 January 2018 11:26

Justin Brady

Messages: 769
Registered: April 2015
Location: Bell Buckle, TN

Karma:

Senior Member

Tilerpep wrote on Wed, 17 January 2018 11:18

Thanks for the replies so far...

I posted this prompted by the thread that is talking about the Victron combiner...anyone venture a guess, or have experience, that it does the same thing with the same other components? I am leaning toward trying a Victron on the 75 across the two battery connections on the isolator.

Not sure what you're asking about the same other components? It is a relay controlled by a PCB that analyzes voltage and voltage trends to determine when to open/close the relay. Pretty clever.

It will work just fine wired across the isolator.

Justin Brady http://www.thegmcrv.com/ 1976 Palm Beach 455

Report message to a moderator

[Message index]

		Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 09:01
		Re: Yandina combiner cycles By: jhbridges on Wed, 17 January 2018 09:18
		Re: Yandina combiner cycles By: Ken Burton on Wed, 17 January 2018 10:02
		Re: Yandina combiner cycles By: Tomtom on Wed, 17 January 2018 10:38
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 11:05
		Re: Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 11:18
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 11:26
		Re: Yandina combiner cycles By: Ken Burton on Wed, 17 January 2018 11:53
		Re: Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 12:31
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 12:45
		Re: Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 12:55
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 14:56
		Re: [GMCnet] Yandina combiner cycles By: bdub on Wed, 17 January 2018 15:10
		Re: [GMCnet] Yandina combiner cycles By: Ken Henderson on Wed, 17 January 2018 17:40
		Re: Yandina combiner cycles By: RF_Burns on Wed, 17 January 2018 20:42
		Re: Yandina combiner cycles By: midlf on Wed, 17 January 2018 20:37
		Re: Yandina combiner cycles By: jhbridges on Thu, 18 January 2018 09:20
		Re: Yandina combiner cycles By: JohnL455 on Fri, 19 January 2018 11:00
		Re: Yandina combiner cycles By: Tilerpep on Wed, 14 March 2018 09:16
		Re: [GMCnet] Yandina combiner cycles By: Mr ERFisher on Wed, 14 March 2018 09:56
		Re: Yandina combiner cycles By: Matt Colie on Wed, 14 March 2018 19:08
		Re: Yandina combiner cycles By: Hardie Johnson on Sat, 17 March 2018 16:14
		Re: [GMCnet] Yandina combiner cycles By: James Hupy on Sat, 17 March 2018 16:33
		Re: [GMCnet] Yandina combiner cycles By: Hardie Johnson on Sat, 17 March 2018 17:31

Previous Topic:	Window Tinting
Next Topic:	Michigan to Reno trip

Goto Forum:

-=] Back to Top [=-

Current Time: Sun May 19 09:46:31 CDT 2024

Total time taken to generate the page: 0.00605 seconds