GMCforum: GMCnet » Yandina combiner cycles

Home » Public Forums » GMCnet » Yandina combiner cycles

Show: Today's Messages :: Polls :: Message Navigator

Re: Yandina combiner cycles [message #328343 is a reply to message #328339]

Wed, 17 January 2018 11:05

Justin Brady

Messages: 769
Registered: April 2015
Location: Bell Buckle, TN

Karma:

Senior Member

Again:
http://shop.pkys.com/Victron-Energy-Cyrix-ct-1224V-120A-Intelligent-Battery-Combiner_p_6769.html?gclid=EAIaIQobChMIlfTxir3f2AIVkoZ-Ch0HKguAEAQYASABEgI 55PD_BwE

Engages at 13V and doesn't disconnect until 12.8V so no cycling like the Yandina.

https://www.victronenergy.com/upload/documents/Datasheet-Cyrix-ct-120A-230A-EN.pdf

Justin Brady http://www.thegmcrv.com/ 1976 Palm Beach 455

Report message to a moderator

[Message index]

		Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 09:01
		Re: Yandina combiner cycles By: jhbridges on Wed, 17 January 2018 09:18
		Re: Yandina combiner cycles By: Ken Burton on Wed, 17 January 2018 10:02
		Re: Yandina combiner cycles By: Tomtom on Wed, 17 January 2018 10:38
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 11:05
		Re: Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 11:18
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 11:26
		Re: Yandina combiner cycles By: Ken Burton on Wed, 17 January 2018 11:53
		Re: Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 12:31
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 12:45
		Re: Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 12:55
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 14:56
		Re: [GMCnet] Yandina combiner cycles By: bdub on Wed, 17 January 2018 15:10
		Re: [GMCnet] Yandina combiner cycles By: Ken Henderson on Wed, 17 January 2018 17:40
		Re: Yandina combiner cycles By: RF_Burns on Wed, 17 January 2018 20:42
		Re: Yandina combiner cycles By: midlf on Wed, 17 January 2018 20:37
		Re: Yandina combiner cycles By: jhbridges on Thu, 18 January 2018 09:20
		Re: Yandina combiner cycles By: JohnL455 on Fri, 19 January 2018 11:00
		Re: Yandina combiner cycles By: Tilerpep on Wed, 14 March 2018 09:16
		Re: [GMCnet] Yandina combiner cycles By: Mr ERFisher on Wed, 14 March 2018 09:56
		Re: Yandina combiner cycles By: Matt Colie on Wed, 14 March 2018 19:08
		Re: Yandina combiner cycles By: Hardie Johnson on Sat, 17 March 2018 16:14
		Re: [GMCnet] Yandina combiner cycles By: James Hupy on Sat, 17 March 2018 16:33
		Re: [GMCnet] Yandina combiner cycles By: Hardie Johnson on Sat, 17 March 2018 17:31

Previous Topic:	Window Tinting
Next Topic:	Michigan to Reno trip

Goto Forum:

-=] Back to Top [=-

Current Time: Sat May 18 13:45:40 CDT 2024

Total time taken to generate the page: 0.00984 seconds