GMCforum: GMCnet » Yandina combiner cycles

Home » Public Forums » GMCnet » Yandina combiner cycles

Show: Today's Messages :: Polls :: Message Navigator

Re: Yandina combiner cycles [message #328339 is a reply to message #328332]

Wed, 17 January 2018 10:38

Tomtom

Messages: 20
Registered: June 2017
Location: Huntington Beach, CA

Karma:

Junior Member

Most of the smart isolators I have read about have a connect voltage of 13.2-13.6 and a disconnect voltage of 12.7 or so. I can't find a published disconnect voltage on the Yandina unit. I would think 12.7 would be low enough for the relay to stay engaged all the time when on shore power.

Tom

Tom 77 Kingsley. Mostly Stock, 455, Quad bag, tachometer, 16"wheels, Macerator. Southern California, huntington beach

Report message to a moderator

[Message index]

		Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 09:01
		Re: Yandina combiner cycles By: jhbridges on Wed, 17 January 2018 09:18
		Re: Yandina combiner cycles By: Ken Burton on Wed, 17 January 2018 10:02
		Re: Yandina combiner cycles By: Tomtom on Wed, 17 January 2018 10:38
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 11:05
		Re: Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 11:18
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 11:26
		Re: Yandina combiner cycles By: Ken Burton on Wed, 17 January 2018 11:53
		Re: Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 12:31
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 12:45
		Re: Yandina combiner cycles By: Tilerpep on Wed, 17 January 2018 12:55
		Re: Yandina combiner cycles By: Justin Brady on Wed, 17 January 2018 14:56
		Re: [GMCnet] Yandina combiner cycles By: bdub on Wed, 17 January 2018 15:10
		Re: [GMCnet] Yandina combiner cycles By: Ken Henderson on Wed, 17 January 2018 17:40
		Re: Yandina combiner cycles By: RF_Burns on Wed, 17 January 2018 20:42
		Re: Yandina combiner cycles By: midlf on Wed, 17 January 2018 20:37
		Re: Yandina combiner cycles By: jhbridges on Thu, 18 January 2018 09:20
		Re: Yandina combiner cycles By: JohnL455 on Fri, 19 January 2018 11:00
		Re: Yandina combiner cycles By: Tilerpep on Wed, 14 March 2018 09:16
		Re: [GMCnet] Yandina combiner cycles By: Mr ERFisher on Wed, 14 March 2018 09:56
		Re: Yandina combiner cycles By: Matt Colie on Wed, 14 March 2018 19:08
		Re: Yandina combiner cycles By: Hardie Johnson on Sat, 17 March 2018 16:14
		Re: [GMCnet] Yandina combiner cycles By: James Hupy on Sat, 17 March 2018 16:33
		Re: [GMCnet] Yandina combiner cycles By: Hardie Johnson on Sat, 17 March 2018 17:31

Previous Topic:	Window Tinting
Next Topic:	Michigan to Reno trip

Goto Forum:

-=] Back to Top [=-

Current Time: Fri May 17 05:07:32 CDT 2024

Total time taken to generate the page: 0.03545 seconds