GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Head gasket leak?
Re: Head gasket leak? [message #328569 is a reply to message #328563] Wed, 24 January 2018 19:47 Go to previous messageGo to previous message
Ken Burton is currently offline  Ken Burton   United States
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma:
Senior Member
Jimmy_Bonez wrote on Wed, 24 January 2018 09:23
Thanks guys. Next oil change I'll take a look at changing the gasket. So far after tightening everything back up that was extremely loose, the oil drips have subsided to a reasonable amount. Now tho it seems like my "granny gear"(downshifting when going up hills or passing) is starting to struggle. It will downshift and kick the secondary on carb open only if I put my foot into the floor. We were coming out of Caprock canyon the other day and climbing a hill and I was nervous we weren't going to make it. We maxed out at 20mph any more Hill and we would have been crawling.



Common problem. I have fixed many of them. The throttle pedal rod gets bent from pressing too hard on it and the kick down switch is then out of adjustment.

With engine not running grab the accelerator pedal and pull up on it bending the rod about 1/2 inch towards you. That is it. You are done.


Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Electric motor converision
Next Topic: Re: [GMCnet] GMCNet Proportional Valve
Goto Forum:
  


Current Time: Wed May 15 04:16:15 CDT 2024

Total time taken to generate the page: 0.01276 seconds