GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Head gasket leak?
Re: [GMCnet] Head gasket leak? [message #328261 is a reply to message #328259] Mon, 15 January 2018 19:18 Go to previous messageGo to previous message
Matt Colie is currently offline  Matt Colie   United States
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma:
Senior Member
jimk wrote on Mon, 15 January 2018 19:54
Jim,
Call Dick Patterson (705)325-4554
Tell him I told you to call him.
He can tell you if it is a head gasket leaking or not as there are no oil pressure at the head.
Be sure to know the differance between the valve cover ad the head.
Should you not be sure call me and I will discribe the two. (800)752-7502.
I'm here to help.
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502

Jeff,

See those numbers?
Load them both in your speed dial Now.
JimK has pulled the (sensitive male anatomy) out of the fire for most of us at one time or another.
Dick Paterson could probably sit down and write a copy of the engine side of the manual (with the required corrections) from memory.

Matt


Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Electric motor converision
Next Topic: Re: [GMCnet] GMCNet Proportional Valve
Goto Forum:
  


Current Time: Wed May 15 21:51:06 CDT 2024

Total time taken to generate the page: 0.00979 seconds