GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Head gasket leak?
Re: [GMCnet] Head gasket leak? [message #328259 is a reply to message #328255] Mon, 15 January 2018 18:54 Go to previous messageGo to previous message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma:
Senior Member
Jim,
Call Dick Patterson (705)325-4554
Tell him I told you to call him.
He can tell you if it is a head gasket leaking or not as there are no oil
pressure at the head.
Be sure to know the differance between the valve cover ad the head.
Should you not be sure call me and I will discribe the two. (800)752-7502.
I'm here to help.

On Mon, Jan 15, 2018 at 4:29 PM, Wayne Rogewski wrote:

> Is it possible that you have a valve cover gasket thats leaking? One way
> to possibly tell where its coming from is to wipe everything down and get
> it dry as best you can. Get some baby powder or talcum powder and dust it
> on the side of the engine you think the leak is coming from. Run the engine
> a bit and see where the powder is now wet.
>
>
> --
> 77 Royale, Rear Dry Bath. 403, 3.55 Final Drive, Lenzi goodies, Patterson
> carb and dizzy.
> Mid Michigan
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>



--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Electric motor converision
Next Topic: Re: [GMCnet] GMCNet Proportional Valve
Goto Forum:
  


Current Time: Wed May 15 02:30:39 CDT 2024

Total time taken to generate the page: 0.01083 seconds