GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Head gasket leak?
Re: Head gasket leak? [message #328255 is a reply to message #328252] Mon, 15 January 2018 18:29 Go to previous messageGo to previous message
77Royale   United States
Messages: 461
Registered: June 2014
Location: Mid Michigan
Karma:
Senior Member
Is it possible that you have a valve cover gasket thats leaking? One way to possibly tell where its coming from is to wipe everything down and get it dry as best you can. Get some baby powder or talcum powder and dust it on the side of the engine you think the leak is coming from. Run the engine a bit and see where the powder is now wet. Id lean toward a leaky valve cover gasket first. The valve covers are easily bent out of shape from over torquing the bolts.



77 Royale, Rear Dry Bath. 403, 3.55 Final Drive, Lenzi goodies, Patterson carb and dizzy. Mid Michigan

[Updated on: Mon, 15 January 2018 18:31]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Electric motor converision
Next Topic: Re: [GMCnet] GMCNet Proportional Valve
Goto Forum:
  


Current Time: Wed May 15 00:54:29 CDT 2024

Total time taken to generate the page: 0.00971 seconds