GMCforum: GMCnet » [GMCnet] bearings

Home » Public Forums » GMCnet » [GMCnet] bearings

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] bearings [message #328009 is a reply to message #328005]

Mon, 08 January 2018 08:40

Bullitthead

Messages: 1411
Registered: November 2013

Karma:

Senior Member

DO NOT remove the shocks without unloading the torsion bars first! Or jack under the control arm to stop it from traveling downward due to spring pressure. A little bit dangerous but doable safely with the right technique. You do not need to remove the shocks to remove the knuckles anyway.

Terry Kelpien ASE Master Technician 73 Glacier 260 Smithfield, Va.

Report message to a moderator

[Message index]

		[GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 16:07
		Re: [GMCnet] bearings By: JohnL455 on Sun, 07 January 2018 17:03
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 17:28
		Re: [GMCnet] bearings By: James Hupy on Sun, 07 January 2018 16:59
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 17:23
		Re: [GMCnet] bearings By: James Hupy on Sun, 07 January 2018 17:27
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 17:42
		Re: [GMCnet] bearings By: Larry on Sun, 07 January 2018 17:44
		Re: [GMCnet] bearings By: James Hupy on Sun, 07 January 2018 17:45
		Re: [GMCnet] bearings By: bdub on Sun, 07 January 2018 18:11
		Re: [GMCnet] bearings By: jimk on Sun, 07 January 2018 18:27
		Re: [GMCnet] bearings By: USAussie on Sun, 07 January 2018 18:36
		Re: [GMCnet] bearings By: jimk on Sun, 07 January 2018 18:42
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 19:05
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 18:49
		Re: [GMCnet] bearings By: bdub on Sun, 07 January 2018 19:02
		Re: [GMCnet] bearings By: Mike Kelley on Sun, 07 January 2018 19:06
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 20:25
		Re: [GMCnet] bearings By: Rollerg on Mon, 08 January 2018 18:45
		Re: [GMCnet] bearings By: jimk on Sun, 07 January 2018 19:49
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 18:44
		Re: [GMCnet] bearings By: USAussie on Sun, 07 January 2018 18:15
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 18:57
		Re: [GMCnet] bearings By: lqqkatjon on Sun, 07 January 2018 20:40
		Re: [GMCnet] bearings By: Ken Burton on Sun, 07 January 2018 22:16
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 23:50
		Re: [GMCnet] bearings By: USAussie on Mon, 08 January 2018 00:40
		Re: [GMCnet] bearings By: Brian Waddell on Mon, 08 January 2018 11:00
		Re: [GMCnet] bearings By: jhb1 on Mon, 08 January 2018 07:42
		Re: [GMCnet] bearings By: Bullitthead on Mon, 08 January 2018 08:40
		Re: [GMCnet] bearings By: Ken Burton on Mon, 08 January 2018 09:02
		Re: [GMCnet] bearings By: Brian Waddell on Mon, 08 January 2018 11:13
		Re: [GMCnet] bearings By: emerystora on Mon, 08 January 2018 12:11
		Re: [GMCnet] bearings By: Ken Burton on Mon, 08 January 2018 18:49
		Re: [GMCnet] bearings By: BobDunahugh on Mon, 08 January 2018 11:05
		Re: [GMCnet] bearings By: Brian Waddell on Mon, 08 January 2018 11:34
		Re: [GMCnet] bearings By: Richard Denney on Mon, 08 January 2018 21:46
		Re: [GMCnet] bearings By: hal kading on Mon, 08 January 2018 23:35

Previous Topic:	[GMCnet] How I stop ME from not completeing task on our GMC.
Next Topic:	Classic Ride // Classic Cult

Goto Forum:

-=] Back to Top [=-

Current Time: Fri May 10 23:26:28 CDT 2024

Total time taken to generate the page: 0.02219 seconds