GMCforum: GMCnet » [GMCnet] bearings

Home » Public Forums » GMCnet » [GMCnet] bearings

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] bearings [message #327964 is a reply to message #327961]

Sun, 07 January 2018 17:28

Brian Waddell

Messages: 409
Registered: March 2010

Karma:

Senior Member

yep...did all that Mueller stuff on front end inspection...I have been through this discussion before here on the net...I would like to drive the coach somewhere to have the front bearings replaced a zerk installed...I know I could send the knuckles out but would like to take the coach to someone capable and known to be so...Brian 77 ele 455

________________________________
From: Gmclist on behalf of John R.Lebetski
Sent: January 7, 2018 4:03 PM
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] bearings

Since you have a 77 it should be one of the best driving. Have you diagnosed by reading Rob Mueller's thesis on the subject? You can find it at GMC
Eastern States site. I was fortunate to be able to get the home aligmment kit that was as offered by Jerry Work a while back. That put the finishing
touch on mine.
--
John Lebetski
Woodstock, IL
77 Eleganza II

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Gmclist Info Page - GMCnet
list.gmcnet.org
To see the collection of prior postings to the list, visit the Gmclist Archives. Using Gmclist: To post a message to all the list members, send email ...

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		[GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 16:07
		Re: [GMCnet] bearings By: JohnL455 on Sun, 07 January 2018 17:03
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 17:28
		Re: [GMCnet] bearings By: James Hupy on Sun, 07 January 2018 16:59
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 17:23
		Re: [GMCnet] bearings By: James Hupy on Sun, 07 January 2018 17:27
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 17:42
		Re: [GMCnet] bearings By: Larry on Sun, 07 January 2018 17:44
		Re: [GMCnet] bearings By: James Hupy on Sun, 07 January 2018 17:45
		Re: [GMCnet] bearings By: bdub on Sun, 07 January 2018 18:11
		Re: [GMCnet] bearings By: jimk on Sun, 07 January 2018 18:27
		Re: [GMCnet] bearings By: USAussie on Sun, 07 January 2018 18:36
		Re: [GMCnet] bearings By: jimk on Sun, 07 January 2018 18:42
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 19:05
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 18:49
		Re: [GMCnet] bearings By: bdub on Sun, 07 January 2018 19:02
		Re: [GMCnet] bearings By: Mike Kelley on Sun, 07 January 2018 19:06
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 20:25
		Re: [GMCnet] bearings By: Rollerg on Mon, 08 January 2018 18:45
		Re: [GMCnet] bearings By: jimk on Sun, 07 January 2018 19:49
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 18:44
		Re: [GMCnet] bearings By: USAussie on Sun, 07 January 2018 18:15
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 18:57
		Re: [GMCnet] bearings By: lqqkatjon on Sun, 07 January 2018 20:40
		Re: [GMCnet] bearings By: Ken Burton on Sun, 07 January 2018 22:16
		Re: [GMCnet] bearings By: Brian Waddell on Sun, 07 January 2018 23:50
		Re: [GMCnet] bearings By: USAussie on Mon, 08 January 2018 00:40
		Re: [GMCnet] bearings By: Brian Waddell on Mon, 08 January 2018 11:00
		Re: [GMCnet] bearings By: jhb1 on Mon, 08 January 2018 07:42
		Re: [GMCnet] bearings By: Bullitthead on Mon, 08 January 2018 08:40
		Re: [GMCnet] bearings By: Ken Burton on Mon, 08 January 2018 09:02
		Re: [GMCnet] bearings By: Brian Waddell on Mon, 08 January 2018 11:13
		Re: [GMCnet] bearings By: emerystora on Mon, 08 January 2018 12:11
		Re: [GMCnet] bearings By: Ken Burton on Mon, 08 January 2018 18:49
		Re: [GMCnet] bearings By: BobDunahugh on Mon, 08 January 2018 11:05
		Re: [GMCnet] bearings By: Brian Waddell on Mon, 08 January 2018 11:34
		Re: [GMCnet] bearings By: Richard Denney on Mon, 08 January 2018 21:46
		Re: [GMCnet] bearings By: hal kading on Mon, 08 January 2018 23:35

Previous Topic:	[GMCnet] How I stop ME from not completeing task on our GMC.
Next Topic:	Classic Ride // Classic Cult

Goto Forum:

-=] Back to Top [=-

Current Time: Sat May 11 07:40:10 CDT 2024

Total time taken to generate the page: 0.00995 seconds