Re: 12pt inner drive bolt torque [message #327865 is a reply to message #327806] |
Sat, 06 January 2018 08:44 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma:
|
Senior Member |
|
|
Use the thick washers intended for the purpose. JimK has them or your local Grainger/McMaster/whomever industrial supply has them. Locally it's Central Fastener. Take an old one along to match if you don't source them from one of the GMC suppliers to ensure you get the correct ones. Frankly, I suspect it's less expensive to simply get a set from Applied than it is to run down to the supplier, wait while the clerk finds the correct parts, wait while s/he takes the wrong washers back and (hopefully) finds the correct ones, etc. What's your time worth anyhow? (I got them for fifty cents a bolt. It took a couple of hours. I bill my time at $800 per day. I would have done Applied but I found the looseness on inspection the day before I left for a show)
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|