GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Wanted-- Fridge vent cover for Birchaven ~ 20" x 12" (Posted on the Swap meet by duplicating here for the email guys.)
Re: Wanted-- Fridge vent cover for Birchaven ~ 20" x 12" [message #328710 is a reply to message #327695] Tue, 30 January 2018 13:31 Go to previous messageGo to previous message
Joe Weir is currently offline  Joe Weir   United States
Messages: 769
Registered: February 2013
Location: Columbia, SC
Karma:
Senior Member
Tim,

I used one of the plastic ones from Jim. It is larger, and I did have to shave off the inside framing, but it is plastic and was easy to do. I did not have to modify the opening on the coach in any way, so if I wanted to go back I could. I did have to make a bracket for the latches to use, but that was a 12" length of aluminum angle and some dremel work.

Once you remove the inside framing of the plastic door frame, it conforms to the curve of the coach, and IMHO,, looks more original than that factory door did.

http://www.gmcmhphotos.com/photos/data/6405/medium/photo_1_2.JPG

http://www.gmcmhphotos.com/photos/adventures/p57979-contoured-fridge-access-door.html

The vents in the door itself fit inside the opening, and the frame has enough depth to secure the tabs on the door without disturbing the surface of the coach. I used puty tape to position it, and then ran some screws to fasten the frame to the surface - much the same way the original was fastened.

http://www.gmcmhphotos.com/photos/adventures/p57981-very-rough-opening-with-framing.html

It appears from my rough opening that my original door was installed at 4:59 on Friday afternoon...

good luck on the quest.

Edit: I just realized I replied to this in the other forum. My apologies - CRS is setting in.

timthenomad wrote on Tue, 02 January 2018 23:31
Hi Ken,

I called Applied, the Sirum's, Cinnabar, sent the co-opt an email. I might have even called Gateway.

Jim didn't have the Dometic aluminum cover in the right size (he does have the Royal one). He does have one of the newer plastic covers in a size that could be made to work on the Birch, but one would have to remover the frame and expand the hole some.

--tim



76 Birchaven - "Wicked Mistress" - New engine, trans, alum radiator, brakes, Sully airbags, fuel lines, seats, adult beverage center... those Coachmen guys were really thinking about us second hand owners by including that beverage center... Columbia, SC.

[Updated on: Tue, 30 January 2018 13:34]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Re: [GMCnet] GMCNet Portional Valve (update)
Next Topic: [GMCnet] Another fallen GMCer
Goto Forum:
  


Current Time: Sun May 19 14:06:47 CDT 2024

Total time taken to generate the page: 0.01544 seconds