GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Ford A426C brake vacuum pump, your opinion please?
Re: [GMCnet] Ford A426C brake vacuum pump, your opinion please? [message #327595 is a reply to message #327591] Sat, 30 December 2017 08:18 Go to previous messageGo to previous message
Ken Henderson is currently offline  Ken Henderson   United States
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma:
Senior Member
Good idea, Johnny, even though I've never had one of the black 3/8"x18"
tywraps fail. And I usually use 4 of them, two around the upper and two
around the lower web of the cross member.

Ken H.

On Sat, Dec 30, 2017 at 8:56 AM, Johnny Bridges via Gmclist <
gmclist@list.gmcnet.org> wrote:

> One comment on Ken's approach - please don't use Ty-Raps (Known as
> zip ties) to hold the canister. The white ones deteriorate in ozone and
> sunshine, the black ones are quite brittle. Use stainless
> steel hose clamps to fasten the canister to the crossmember. If it manages
> to
> fall off and pull the lines loose, you'll have zero boost to stop.
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Re: [GMCnet] Waterless Engine Coolent
Next Topic: [GMCnet] Waterless Engine Coolant
Goto Forum:
  


Current Time: Sun May 19 05:01:29 CDT 2024

Total time taken to generate the page: 0.00878 seconds