GMCforum: GMCnet » [GMCnet] Soft start the for AC

Home » Public Forums » GMCnet » [GMCnet] Soft start the for AC

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Soft start the for AC [message #327440 is a reply to message #327435]

Sat, 23 December 2017 18:23

Scott Nutter

Messages: 782
Registered: January 2015
Location: Houston/San Diego

Karma:

Senior Member

Jerry,
I'm assuming your old factory rear AC was 11,000 btu? I believe my old AC was the same.
I put a Coleman mach 8 15,000 btu in the rear. Great AC but too much btu's for such a small area, it constantatly short cycles. I guess the engineers were right in the first place!

So the delima is,
1. Replace my 15k mach 8 low profile for a 11k mach 1 standard height. Cost would be around $600.
2. Get the soft start for the mach 8 (but that still won't stop the short cycling). Cost $300

Coleman does make a 9,000 btu mach 8 low profile unit. Maybe that's the way to go..............but I can't find anyone who has one for a review....

Scott.

Scott Nutter 1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final drive, Quad bags, Dave Lenzi super duty mid axle disc brakes, tankless water heater, everything Lenzi. Alex Ferrera installed MSD Atomic EFI Houston, Texas

Report message to a moderator

[Message index]

		[GMCnet] Soft start the for AC By: glwgmc on Sat, 23 December 2017 11:56
		Re: [GMCnet] Soft start the for AC By: Scott Nutter on Sat, 23 December 2017 18:23

Previous Topic:	Re: [GMCnet] Furnace duct in 23' 73
Next Topic:	[GMCnet] Soft start for AC

Goto Forum:

-=] Back to Top [=-

Current Time: Mon May 13 16:20:23 CDT 2024

Total time taken to generate the page: 0.00767 seconds