GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Re: [GMCnet] Transmission vacuum modulator leaking?
Re: [GMCnet] Question [message #327496 is a reply to message #327464] Tue, 26 December 2017 08:25 Go to previous messageGo to previous message
GMC.LES is currently offline  GMC.LES   United States
Messages: 505
Registered: April 2014
Karma:
Senior Member
Gordon,
Did you try contacting Marcus?
I recall that he may of had a set of heads available, fully rebuilt, just needing re-assembly. He may have sold them though. Worth a try if you need them.

Les Burt
Montreal
'75 Eleganza 26'


> On Dec 24, 2017, at 7:56 PM, Matt Colie wrote:
>
> gibsongo wrote on Sun, 24 December 2017 13:31
>> Mike, thanks for the offer but I have to get this taken care of sooner rather than later. So far I haven't gotten any nasty notes through the
>> door, but a visit from the local constabulary informing me of my violation of municipal regulations can't be too far off.... Matt - my guestimate
>> diagnosis matches yours - I missed your string from this summer about the same subject but found it doing a search of this site on cylinder heads.
>> What did you end up doing finally - engine out or just the heads? And what did you end up finding?
>>
>> I've found a garage with big bays about 40 miles away that will accommodate me, and am booked in on January 3rd. I've got my fingers crossed
>> hoping for a head gasket problem rather than a cracked head. Just in case I've been looking around for "J" heads, but haven't located any so far.
>> Hopefully I won't need them.......
>>
>> Merry Christmas to you all!
>
> Gordon,
>
> I don't have mine open yet. There were other demands on my time and after talking to Dave Lenzi I decided to pull the front frame out the front. I
> have enough room to do that. I could have pulled it out the top. As with a 23, that is not so tough. But the refit of the front dress sounds a
> whole lot like a "ship in a bottle" that I don't have the patience for. I did manage to acquire access to both a pair of G and a pair of J heads.
> (They were still bolted to engines. Part of my hold up.) Both of which look good to a visual inspection. (My visual inspections are pretty good, but
> can't beat magnetic particle.) I am hoping to pull the frame out just after the new year.
>
> Keep us posted..
>
> Matt
> --
> Matt & Mary Colie - '73 Glacier 23 - Members GMCMI, GMCGL, GMCES
> Electronically Controlled Quiet Engine Cooling Fan
> OE Rear Drum Brakes with Applied Control Arms
> SE Michigan - Twixt A2 and Detroit
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Way off topic: Largest rocket to ever be launched.
Next Topic: [GMCnet] Removing the radiator in a 78 GMC.
Goto Forum:
  


Current Time: Mon May 13 04:07:38 CDT 2024

Total time taken to generate the page: 0.01715 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software