Re: Air Suspension Confusion [message #326860 is a reply to message #326854] |
Thu, 07 December 2017 16:19 |
rvanwin
Messages: 325 Registered: April 2007 Location: Battlefield, MO
Karma:
|
Senior Member |
|
|
Tom Lins wrote on Thu, 07 December 2017 14:42I am trying to figure out what is going on with my air suspension.
We just got the coach home after purchasing it in MO.
On the way home the travel mode auto and hold function just the way my 78 used to.
If you leave it in Auto it will leak down over night.
If you leave it in hold it will stay at ride height overnight.
However the Raise and Lower to level the coach in a campground do not function at all.
I find this somewhat confusing since I would think the raise solenoid would be used to bring the coach up to ride height after leaking down overnight.
Anybody have any thought on where to look.
First thing to look at is the switches themselves. Take them out and spray with contact cleaner. It does happen that one function stops working due to corrosion on the contacts. I had one where only one side would raise and the other would not. Cleaned the switch and both work as they should.
Randy & Margie
'77 Eleganza II '403'
Battlefield, MO
|
|
|