GMCforum: GMCnet » Jacks and Stands ....

Home » Public Forums » GMCnet » Jacks and Stands ....

Show: Today's Messages :: Polls :: Message Navigator

Re: Jacks and Stands .... [message #326816 is a reply to message #326810]

Wed, 06 December 2017 18:02

Scott Nutter

Messages: 782
Registered: January 2015
Location: Houston/San Diego

Karma:

Senior Member

Isn't there a limitation that when jacking up the front end only lift from the center, or equally from the sides to keep level, so not to pop out the windshield?

Scott Nutter 1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final drive, Quad bags, Dave Lenzi super duty mid axle disc brakes, tankless water heater, everything Lenzi. Alex Ferrera installed MSD Atomic EFI Houston, Texas

Report message to a moderator

[Message index]

		Jacks and Stands .... By: Dutch Marc on Wed, 06 December 2017 15:17
		Re: Jacks and Stands .... By: 77Royale on Wed, 06 December 2017 15:35
		Re: Jacks and Stands .... By: Carl S. on Wed, 06 December 2017 17:31
		Re: Jacks and Stands .... By: Carl S. on Wed, 06 December 2017 17:37
		Re: [GMCnet] Jacks and Stands .... By: Richard Denney on Wed, 06 December 2017 17:35
		Re: Jacks and Stands .... By: Scott Nutter on Wed, 06 December 2017 18:02
		Re: [GMCnet] Jacks and Stands .... By: USAussie on Wed, 06 December 2017 18:18
		Re: [GMCnet] Jacks and Stands .... By: USAussie on Wed, 06 December 2017 18:27
		Re: Jacks and Stands .... By: Dutch Marc on Mon, 11 December 2017 10:41

Previous Topic:	Cheesy Christmas movie
Next Topic:	Out of the Worm Hole

Goto Forum:

-=] Back to Top [=-

Current Time: Mon May 06 18:00:13 CDT 2024

Total time taken to generate the page: 0.00818 seconds