| Re: [GMCnet] Floor repair. [message #326436 is a reply to message #326429] |
Tue, 28 November 2017 10:37   |
Dave Stragand
Messages: 307
Registered: October 2017
Karma:
|
Senior Member |
|
|
For those of you who have not used an impact driverl, it is totally
manual (no air compressor required).
You place it on the screw and strike the end with a hammer. It
simultaneously keeps the screwdriver head securely seated in the screw,
while also providing the twisting force to loosen it. There is much
less chance of stripping out the screw head due to the seating force
that is equally applied.
They are a 'must have' tool for old motorcycles, and mine has earned its
weight in gold over the years. Well worth the small expenditure!
-Dave
1978 Transmode (403)
Pittsburgh, PA
-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of
Johnny Bridges via Gmclist
Sent: Tuesday, November 28, 2017 9:05 AM
To: gmclist@list.gmcnet.org
Cc: Johnny Bridges
Subject: Re: [GMCnet] Floor repair.
Here's how to get the screws out:
https://www.homedepot.com/p/Powerbuilt-7-5-in-Impact-Driver-Kit-648002/2
04505142?cm_mmc=Shopping%7cTHD%7cG%7c0%7cG-BASE-PLA-D25T-HandTools%7c&gc
lid=EAIaIQobChMIl_21yrfh1wIV1bXACh3_zQRJEAQYASABEgLtZ_D_BwE&gclsrc=aw.ds
&dclid=CKD-rtK34dcCFU1XAQodzusAVQ
And a set of these:
https://www.homedepot.com/p/DEWALT-1-in-Steel-Torx-Security-Bit-Set-7-Pi
ece-DWA1TS-7V/301313336
You might find them a bit less on eBay too.
--johnny
--
76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
"I forgive them all, save those who hurt the dogs. They must answer to
me in hell" - ol Andy, paraphrased
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
1978 Transmode (403)
Pittsburgh, PA
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
