GMCforum: GMCnet » Aluminum intake manifold-opinions..

Home » Public Forums » GMCnet » Aluminum intake manifold-opinions..

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Aluminum intake manifold-opinions.. [message #326178 is a reply to message #326177]

Sun, 19 November 2017 22:10

jimk

Messages: 6734
Registered: July 2006
Location: Belmont, CA

Karma:

Senior Member

Mike,
I saw in the discussion that they were ignoring the more functional product.
People that take it as 100% salesmanship can keep on thinking.
I spend considerable time to assist people n/c.
Mike I appreciate your sincere evaluation of my comments.
Our Air Filter division is where we do very strong contribution to our
existence.

On Sun, Nov 19, 2017 at 7:28 PM, Ken Henderson
wrote:

> Scott,
>
> No, the damage shown in my album had nothing to do with crossover plates --
> those had not yet been invented. Edelbrock then, and now, insisted on the
> use of cast iron plugs, which they supplied in the crossover ports. THOSE
> PLUGS are what almost wore through into the water jacket in my cylinder
> heads, and DID wear into one of the head bolts.
>
> Ken H.
>
>
> On Sun, Nov 19, 2017 at 5:30 PM, Scott Nutter
> wrote:
>
>> Ken,
>> Was there damage because of the crossover plates?
>> Jim K's aluminum manifold doesn't have crossover ports. I consider that
>> the best reason to change out the manifolds.
>> Scott.
>> --
>> Scott Nutter
>> 1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21
> final
>> drive, Quad bags, tankless water heater, everything Lenzi.
>> Houston, Texas
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502

Report message to a moderator

[Message index]

		Aluminum intake manifold-opinions.. By: Scott Nutter on Sun, 19 November 2017 14:02
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: powerjon on Sun, 19 November 2017 14:48
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: James Hupy on Mon, 20 November 2017 10:04
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Ken Henderson on Sun, 19 November 2017 14:59
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Sun, 19 November 2017 16:02
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Mike Kelley on Sun, 19 November 2017 16:09
		Re: Aluminum intake manifold-opinions.. By: Scott Nutter on Sun, 19 November 2017 16:30
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Richard Denney on Sun, 19 November 2017 21:03
		Re: Aluminum intake manifold-opinions.. By: Ken Burton on Sun, 19 November 2017 21:14
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Ken Henderson on Sun, 19 November 2017 21:28
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Sun, 19 November 2017 22:10
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Sun, 19 November 2017 22:19
		Re: Aluminum intake manifold-opinions.. By: jhbridges on Sun, 19 November 2017 17:10
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: bdub on Mon, 20 November 2017 07:44
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: bdub on Mon, 20 November 2017 09:51
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Richard Denney on Mon, 20 November 2017 10:35
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: James Hupy on Mon, 20 November 2017 11:04
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Harry on Mon, 20 November 2017 12:00
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: USAussie on Tue, 21 November 2017 08:02
		Re: Aluminum intake manifold-opinions.. By: lw8000 on Mon, 20 November 2017 08:16
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Mon, 20 November 2017 08:27
		Re: Aluminum intake manifold-opinions.. By: Carl S. on Mon, 20 November 2017 09:13
		Re: Aluminum intake manifold-opinions.. By: Scott Nutter on Mon, 20 November 2017 17:33
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Richard Denney on Tue, 21 November 2017 14:54
		Re: Aluminum intake manifold-opinions.. By: jhbridges on Tue, 21 November 2017 07:35
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: USAussie on Tue, 21 November 2017 07:49
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Ken Henderson on Tue, 21 November 2017 09:40

Previous Topic:	New governor assembly for sale
Next Topic:	[GMCnet] A/C vacuum pump

Goto Forum:

-=] Back to Top [=-

Current Time: Thu May 16 16:11:27 CDT 2024

Total time taken to generate the page: 0.01078 seconds