GMCforum: GMCnet » Aluminum intake manifold-opinions..

Home » Public Forums » GMCnet » Aluminum intake manifold-opinions..

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Aluminum intake manifold-opinions.. [message #326177 is a reply to message #326169]

Sun, 19 November 2017 21:28

Ken Henderson

Messages: 8726
Registered: March 2004
Location: Americus, GA

Karma:

Senior Member

Scott,

No, the damage shown in my album had nothing to do with crossover plates --
those had not yet been invented. Edelbrock then, and now, insisted on the
use of cast iron plugs, which they supplied in the crossover ports. THOSE
PLUGS are what almost wore through into the water jacket in my cylinder
heads, and DID wear into one of the head bolts.

Ken H.

On Sun, Nov 19, 2017 at 5:30 PM, Scott Nutter wrote:

> Ken,
> Was there damage because of the crossover plates?
> Jim K's aluminum manifold doesn't have crossover ports. I consider that
> the best reason to change out the manifolds.
> Scott.
> --
> Scott Nutter
> 1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final
> drive, Quad bags, tankless water heater, everything Lenzi.
> Houston, Texas
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach

Report message to a moderator

[Message index]

		Aluminum intake manifold-opinions.. By: Scott Nutter on Sun, 19 November 2017 14:02
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: powerjon on Sun, 19 November 2017 14:48
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: James Hupy on Mon, 20 November 2017 10:04
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Ken Henderson on Sun, 19 November 2017 14:59
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Sun, 19 November 2017 16:02
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Mike Kelley on Sun, 19 November 2017 16:09
		Re: Aluminum intake manifold-opinions.. By: Scott Nutter on Sun, 19 November 2017 16:30
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Richard Denney on Sun, 19 November 2017 21:03
		Re: Aluminum intake manifold-opinions.. By: Ken Burton on Sun, 19 November 2017 21:14
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Ken Henderson on Sun, 19 November 2017 21:28
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Sun, 19 November 2017 22:10
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Sun, 19 November 2017 22:19
		Re: Aluminum intake manifold-opinions.. By: jhbridges on Sun, 19 November 2017 17:10
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: bdub on Mon, 20 November 2017 07:44
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: bdub on Mon, 20 November 2017 09:51
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Richard Denney on Mon, 20 November 2017 10:35
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: James Hupy on Mon, 20 November 2017 11:04
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Harry on Mon, 20 November 2017 12:00
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: USAussie on Tue, 21 November 2017 08:02
		Re: Aluminum intake manifold-opinions.. By: lw8000 on Mon, 20 November 2017 08:16
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Mon, 20 November 2017 08:27
		Re: Aluminum intake manifold-opinions.. By: Carl S. on Mon, 20 November 2017 09:13
		Re: Aluminum intake manifold-opinions.. By: Scott Nutter on Mon, 20 November 2017 17:33
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Richard Denney on Tue, 21 November 2017 14:54
		Re: Aluminum intake manifold-opinions.. By: jhbridges on Tue, 21 November 2017 07:35
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: USAussie on Tue, 21 November 2017 07:49
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Ken Henderson on Tue, 21 November 2017 09:40

Previous Topic:	New governor assembly for sale
Next Topic:	[GMCnet] A/C vacuum pump

Goto Forum:

-=] Back to Top [=-

Current Time: Thu May 16 16:22:45 CDT 2024

Total time taken to generate the page: 0.02182 seconds