GMCforum: GMCnet » Aluminum intake manifold-opinions..

Home » Public Forums » GMCnet » Aluminum intake manifold-opinions..

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Aluminum intake manifold-opinions.. [message #326168 is a reply to message #326167]

Sun, 19 November 2017 16:09

Mike Kelley

Messages: 467
Registered: February 2017

Karma:

Senior Member

Jim K.:
I love the way you jump in and give GMC'ers helpful info. Some people would say it is good salesmanship, but I just appreciate that you try to help us at every opportunity!!!
Thanks again,
Mike/The Corvair a holic

Sent from my iPhone

> On Nov 19, 2017, at 4:02 PM, Jim Kanomata wrote:
>
> Our Aluminum intake is a improved unit, Low Profile like the original and
> is custom machine to overcome the previous matching of ports and Air
> conditioning compressor bracket mount hole location and size. Like the
> Edelbrock, the exhaust passage is blocked standard.
>
> On Sun, Nov 19, 2017 at 12:59 PM, Ken Henderson
> wrote:
>
>> If you consider using the Edelbrock manifold, be sure to review this first:
>>
>> http://www.gmcmhphotos.com/photos/g3057-cylinder-head-
>> damage-from-exhaust-crossover-plugs.html
>>
>> Ken H.
>>
>>
>> On Sun, Nov 19, 2017 at 3:02 PM, Scott Nutter
>> wrote:
>>
>>> Hello,
>>> I might be close to removing the stock intake manifold on my 455, and was
>>> wondering the advantages of replacing it with a aluminum intake.
>>>
>>> The #1 best thing that I can see would be not ever needing the heat
>>> block-off plates, #2 would be a new product without any
>> cracks(hopefully),
>>> and #3
>>> would be the weight.
>>>
>>> Any other pro's of con's?
>>> I have searched prior post and can only find info for the 403's
>>>
>>> Thank you,
>>> Scott.
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		Aluminum intake manifold-opinions.. By: Scott Nutter on Sun, 19 November 2017 14:02
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: powerjon on Sun, 19 November 2017 14:48
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: James Hupy on Mon, 20 November 2017 10:04
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Ken Henderson on Sun, 19 November 2017 14:59
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Sun, 19 November 2017 16:02
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Mike Kelley on Sun, 19 November 2017 16:09
		Re: Aluminum intake manifold-opinions.. By: Scott Nutter on Sun, 19 November 2017 16:30
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Richard Denney on Sun, 19 November 2017 21:03
		Re: Aluminum intake manifold-opinions.. By: Ken Burton on Sun, 19 November 2017 21:14
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Ken Henderson on Sun, 19 November 2017 21:28
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Sun, 19 November 2017 22:10
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Sun, 19 November 2017 22:19
		Re: Aluminum intake manifold-opinions.. By: jhbridges on Sun, 19 November 2017 17:10
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: bdub on Mon, 20 November 2017 07:44
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: bdub on Mon, 20 November 2017 09:51
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Richard Denney on Mon, 20 November 2017 10:35
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: James Hupy on Mon, 20 November 2017 11:04
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Harry on Mon, 20 November 2017 12:00
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: USAussie on Tue, 21 November 2017 08:02
		Re: Aluminum intake manifold-opinions.. By: lw8000 on Mon, 20 November 2017 08:16
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: jimk on Mon, 20 November 2017 08:27
		Re: Aluminum intake manifold-opinions.. By: Carl S. on Mon, 20 November 2017 09:13
		Re: Aluminum intake manifold-opinions.. By: Scott Nutter on Mon, 20 November 2017 17:33
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Richard Denney on Tue, 21 November 2017 14:54
		Re: Aluminum intake manifold-opinions.. By: jhbridges on Tue, 21 November 2017 07:35
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: USAussie on Tue, 21 November 2017 07:49
		Re: [GMCnet] Aluminum intake manifold-opinions.. By: Ken Henderson on Tue, 21 November 2017 09:40

Previous Topic:	New governor assembly for sale
Next Topic:	[GMCnet] A/C vacuum pump

Goto Forum:

-=] Back to Top [=-

Current Time: Thu May 16 03:10:00 CDT 2024

Total time taken to generate the page: 0.00734 seconds