GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Booster Replacement
Re: [GMCnet] Booster Replacement [message #326086 is a reply to message #326083] Thu, 16 November 2017 19:11 Go to previous messageGo to previous message
Rollerg is currently offline  Rollerg   United States
Messages: 111
Registered: November 2014
Location: Marysville, MI
Karma:
Senior Member
I know that I had success using a racheting box end wrench and a lot of patience.
I was able to get at from the side and flexing the dash .
Dave’s sensitized booster has been a big plus for our coach. Especially with mountain driving ing the west.

Gary Coaster / Reno, NV
1977 GMC Eleganza ll
GMC RV Day Night Shade Sales
GMCShades@gmail.com
www.GMCMotorhomemarketplace.com/GMC_Shades/

> On Nov 16, 2017, at 1:42 PM, Ken Burton wrote:
>
> lqqkatjon wrote on Thu, 16 November 2017 15:14
>> Some dashes can be flexed, and the correct small hands can get those nuts without cutting.
>>
>> A thin ratchet wrench is needed. I use a craftsman ratchet wrench.
>
> I replaced mine quite a few years ado WITHOUT cutting a hole. It was a lot of fun getting in there with just about every small wrench I own but it is
> possible. I am NOT PowerLevel. Mine is Electro level I
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Thoughts on 2017 Pacifica Seat Takeouts?
Next Topic: [GMCnet] Overloading Tires
Goto Forum:
  


Current Time: Sat May 11 23:57:17 CDT 2024

Total time taken to generate the page: 0.03930 seconds