GMCforum: GMCnet » High torque starter?

Home » Public Forums » GMCnet » High torque starter?

Show: Today's Messages :: Polls :: Message Navigator

Re: High torque starter? [message #326060 is a reply to message #326059]

Thu, 16 November 2017 08:01

lqqkatjon

Messages: 2324
Registered: October 2010
Location: St. Cloud, MN

Karma:

Senior Member

Have seen some owners put them in and are happy.

However before spending that money, have a shop rebuild yours, and make sure you have good battery cables and battery to it.

Your symptoms seem to say that the starter needs a refresh, or your battery cables are stock location from battery to boost solenoid then to starter.

Easy to split the battery positive cable and have a heavy awg
Direct from battery post to starter. The. Run a cable from battery to boost solenoid.

Jon Roche 75 palm beach EBL EFI, manny headers, Micro Level, rebuilt most of coach now. St. Cloud, MN http://lqqkatjon.blogspot.com/

Report message to a moderator

[Message index]

		High torque starter? By: fred v on Thu, 16 November 2017 07:54
		Re: High torque starter? By: lqqkatjon on Thu, 16 November 2017 08:01
		Re: High torque starter? By: JohnL455 on Thu, 16 November 2017 08:11
		Re: High torque starter? By: Matt Colie on Thu, 16 November 2017 10:18
		Re: [GMCnet] High torque starter? By: James Hupy on Thu, 16 November 2017 10:35
		Re: [GMCnet] High torque starter? By: Keith V on Thu, 16 November 2017 12:38
		Re: [GMCnet] High torque starter? By: jimk on Thu, 16 November 2017 12:57
		Re: High torque starter? By: fred v on Fri, 17 November 2017 17:54
		Re: [GMCnet] High torque starter? By: jimk on Fri, 17 November 2017 20:37
		Re: [GMCnet] High torque starter? By: fred v on Sat, 18 November 2017 17:43
		Re: [GMCnet] High torque starter? By: jimk on Sat, 18 November 2017 17:48
		Re: High torque starter? By: jhbridges on Sat, 18 November 2017 07:38
		Re: [GMCnet] High torque starter? By: jimk on Sat, 18 November 2017 13:25
		Re: [GMCnet] High torque starter? By: Kosier on Sat, 18 November 2017 13:54
		Re: [GMCnet] High torque starter? By: James Hupy on Sat, 18 November 2017 14:18
		Re: High torque starter? By: Ken Burton on Sat, 18 November 2017 23:55

Previous Topic:	porous aluminum tranny pan
Next Topic:	New governor assembly for sale

Goto Forum:

-=] Back to Top [=-

Current Time: Sat May 11 04:23:57 CDT 2024

Total time taken to generate the page: 0.01060 seconds