GMCforum: GMCnet » [GMCnet] Shoddy Preventative Maintenance

Home » Public Forums » GMCnet » [GMCnet] Shoddy Preventative Maintenance

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Shoddy Preventative Maintenance [message #326027 is a reply to message #326004]

Wed, 15 November 2017 11:58

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma:

Senior Member

I took a look at mine (Tom Pryor design from Applied) and I'm not worried. The pivot anchor is cut to match the bottom of the bogie pivot mount, and the plate which holds the nut for the through bolt is bigger in each dimension than the slot - it cannot pass back through with the bolt screwed into it.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

[Message index]

		[GMCnet] Shoddy Preventative Maintenance By: Ken Henderson on Tue, 14 November 2017 15:30
		Re: [GMCnet] Shoddy Preventative Maintenance By: kerry pinkerton on Tue, 14 November 2017 16:58
		Re: [GMCnet] Shoddy Preventative Maintenance By: Ken Henderson on Tue, 14 November 2017 20:19
		Re: [GMCnet] Shoddy Preventative Maintenance By: jhbridges on Tue, 14 November 2017 21:16
		Re: [GMCnet] Shoddy Preventative Maintenance By: 78 Barbi on Tue, 14 November 2017 23:00
		Re: [GMCnet] Shoddy Preventative Maintenance By: jhbridges on Wed, 15 November 2017 11:58
		Re: [GMCnet] Shoddy Preventative Maintenance By: Ken Henderson on Wed, 15 November 2017 17:43

Previous Topic:	[GMCnet] Honda 6010
Next Topic:	EFI vs Carb

Goto Forum:

-=] Back to Top [=-

Current Time: Mon May 20 21:44:08 CDT 2024

Total time taken to generate the page: 1.77148 seconds