GMCforum: GMCnet » Three port vacuum valve

Home » Public Forums » GMCnet » Three port vacuum valve

Show: Today's Messages :: Polls :: Message Navigator

Re: Three port vacuum valve [message #325949 is a reply to message #325947]

Sun, 12 November 2017 18:23

Hal StClair

Messages: 971
Registered: March 2013
Location: Rio Rancho NM

Karma:

Senior Member

I guess Mine is OK after all so I won't need one thank goodness. BUT, unfortunately, the heater control itself has a broken pin that looks like a sun of a gun to make. I'm hoping the super glue will hold it together or if not there might be one available from a salvage GMC. We'll see.
Hal

"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane." 1977 Royale 101348, 1977 Royale 101586, Diesel powered, 1974 Eagle Bus 45',w/slideout, Rio Rancho, NM

Report message to a moderator

[Message index]

		Three port vacuum valve By: Hal StClair on Sun, 12 November 2017 14:27
		Re: Three port vacuum valve By: Hal StClair on Sun, 12 November 2017 18:23
		Re: [GMCnet] Three port vacuum valve By: emerystora on Sun, 12 November 2017 19:05
		Re: [GMCnet] Three port vacuum valve By: Hal StClair on Mon, 13 November 2017 13:04

Previous Topic:	SEMNO Lunch Rename Meeting
Next Topic:	[GMCnet] Dave M's condition

Goto Forum:

-=] Back to Top [=-

Current Time: Sun May 12 08:31:14 CDT 2024

Total time taken to generate the page: 0.00800 seconds