GMCforum: GMCnet » [GMCnet] making wiring diagrams?

Home » Public Forums » GMCnet » [GMCnet] making wiring diagrams?

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] making wiring diagrams? [message #325851 is a reply to message #325843]

Wed, 08 November 2017 09:51

RF_Burns

Messages: 2276
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

I've used AutoTrax Dex for making wiring diagrams even though its a schematic PCB program. Its easy using the component designer to make whatever symbols you like and 3d packages. Its only $49 for the full version.

I still use Eagle for my PCB's... cause I'm usually up against a deadline and I know it better.

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		[GMCnet] making wiring diagrams? By: Keith V on Tue, 07 November 2017 23:12
		Re: [GMCnet] making wiring diagrams? By: USAussie on Wed, 08 November 2017 00:37
		Re: [GMCnet] making wiring diagrams? By: bpimm on Wed, 08 November 2017 08:54
		Re: [GMCnet] making wiring diagrams? By: Keith V on Wed, 08 November 2017 09:43
		Re: [GMCnet] making wiring diagrams? By: RF_Burns on Wed, 08 November 2017 09:51
		Re: [GMCnet] making wiring diagrams? By: Keith V on Wed, 08 November 2017 13:44
		Re: [GMCnet] making wiring diagrams? By: James Hupy on Wed, 08 November 2017 10:07

Previous Topic:	[GMCnet] NEW LISTING! \| 1978 ROYALE \| $1,000
Next Topic:	Modify electrolevel 2 pumps

Goto Forum:

-=] Back to Top [=-

Current Time: Fri May 17 12:59:15 CDT 2024

Total time taken to generate the page: 0.01629 seconds