Re: [GMCnet] Modify electrolevel 2 pumps [message #325819 is a reply to message #325817] |
Tue, 07 November 2017 10:07 |
Will Albers
Messages: 183 Registered: November 2017 Location: Detroit MI (Belleville)
Karma:
|
Senior Member |
|
|
Thank you John. Are the level sensors variable voltage, or a simple 12v
switch? as one side is a constant 8v regardless of the inflate/deflate
switch position. The other is 1v on raise, and 12v on deflate,
I'm thinking of a single larger VIAIR with a tank as i have one from my 4x4
days.
On Tue, Nov 7, 2017 at 10:40 AM, John Shutzbaugh
wrote:
> The valves on the compressors are the LOWER valves and are controlled by
> the sensors in the wheel wells. It is possible to replace the compressors
> with another type, but you will have to obtain and plumb in separate
> exhaust valves. Also the air dryer is incorporated in the compressor
> assemblies,
> so a filter/dryer should be provided.
> --
> John Shutzbaugh, Vacaville, CA, ncserv@aol.com;
> 77 Eleganza, bought it new, can't blame PO, and
> 78 Buskirk stretch, "What were we thinking?"
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
1978 Palm Beach.
Detroit Michigan
|
|
|