| Seal between P30 MC and booster. [message #325779] |
Sun, 05 November 2017 10:34  |
 |
RF_Burns
Messages: 2276
Registered: June 2008
Location: S. Ontario, Canada
Karma:
|
Senior Member |
|
|
So before bleeding the brakes after installing the new caliper, I wanted to check the clearance on the MC push-pin. I loosened the MC move it out of the way. I can see there is water leaking into the nose area between the MC and the booster (rust!). I have a P30 MC with the support bracket between the MC and the booster. There does not appear to be anything to seal water out of this area. Especially with that bracket in between.
Am I missing a seal here? There is a rubber piece in the booster around the push-pin, but it appears to be too far in to mate to the M/C.
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
