GMCforum: GMCnet » One-ton front caliper has been rubbing on disk

Home » Public Forums » GMCnet » One-ton front caliper has been rubbing on disk

Show: Today's Messages :: Polls :: Message Navigator

Re: One-ton front caliper has been rubbing on disk [message #325759 is a reply to message #325756]

Sat, 04 November 2017 15:30

RF_Burns

Messages: 2276
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

Thanks JR and Terry. I've got extra I could take off the disk outside of the wear area, but I don't have a lathe to do a nice job on it. So I'll grind the bit off each end of the caliper. It doesn't bind so there should not be much to take off... except I guess the caliper moves when the brake is applied.

I've got some 2" wide electrical tape to wrap the piston to keep the filings away from it.

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		One-ton front caliper has been rubbing on disk By: RF_Burns on Sat, 04 November 2017 13:29
		Re: [GMCnet] One-ton front caliper has been rubbing on disk By: powerjon on Sat, 04 November 2017 14:20
		Re: One-ton front caliper has been rubbing on disk By: Bullitthead on Sat, 04 November 2017 15:01
		Re: One-ton front caliper has been rubbing on disk By: RF_Burns on Sat, 04 November 2017 15:30
		Re: One-ton front caliper has been rubbing on disk By: Harry on Sat, 04 November 2017 21:20
		Re: One-ton front caliper has been rubbing on disk By: RF_Burns on Sat, 04 November 2017 21:42
		Re: [GMCnet] One-ton front caliper has been rubbing on disk By: Ken Henderson on Sun, 05 November 2017 05:15

Previous Topic:	[GMCnet] Top Marker Lights
Next Topic:	[GMCnet] Muscle Car/Corvette Nationals in Chicago November 18th.. GMC display

Goto Forum:

-=] Back to Top [=-

Current Time: Wed May 15 21:17:03 CDT 2024

Total time taken to generate the page: 0.03617 seconds