GMCforum: GMCnet » Vent line to filler neck

Home » Public Forums » GMCnet » Vent line to filler neck

Show: Today's Messages :: Polls :: Message Navigator

Re: Vent line to filler neck [message #325551 is a reply to message #325541]

Mon, 30 October 2017 08:49

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma:

Senior Member

Ken,

That piece and the couplers on the fill line are the only part that are not Gates Barrier. That has lasted 10 years so far. If I have to redo it, I will get something better.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

[Message index]

		Vent line to filler neck By: Ken Burton on Sun, 29 October 2017 23:34
		Re: Vent line to filler neck By: lqqkatjon on Mon, 30 October 2017 05:58
		Re: Vent line to filler neck By: Matt Colie on Mon, 30 October 2017 08:49
		Re: [GMCnet] Vent line to filler neck By: jimk on Mon, 30 October 2017 11:31
		Re: Vent line to filler neck By: Ken Burton on Mon, 30 October 2017 12:10

Previous Topic:	[GMCnet] Air heater or coolant heater
Next Topic:	[GMCnet] homemade tools..

Goto Forum:

-=] Back to Top [=-

Current Time: Sun May 19 05:07:01 CDT 2024

Total time taken to generate the page: 0.01284 seconds