Re: Migrating window [message #325471 is a reply to message #325464] |
Fri, 27 October 2017 07:37 |
mghamms
Messages: 466 Registered: March 2016 Location: Ware, Massachusetts
Karma:
|
Senior Member |
|
|
I had the same problem with the same window.
The spacers are about 1/8". Two on the front side one on the top and one on the bottom.
I found them in the sealant when I removed the window.
They just keep the space even and are not that fussy.
I used a butal rubber sealant in a caulk gun and suction cups from flee bay.
1977 Kingsley 455 as stock as it gets except lots of Ragusa parts
[Updated on: Fri, 27 October 2017 07:39] Report message to a moderator
|
|
|