GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Rear Wheel Seal
Re: Rear Wheel Seal [message #325492 is a reply to message #325364] Sat, 28 October 2017 08:01 Go to previous messageGo to previous message
RF_Burns is currently offline  RF_Burns   Canada
Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada
Karma:
Senior Member
Maybe the attached profile drawing will help. I believe Ken Henderson sent me this.

http://www.gmcmhphotos.com/photos/skf-21771-rear-seal-fails-test/p63893-rear-axle-seal.html

I think there maybe one more step or a taper on the axle at the seal area. The profile of the seal lip has been moved closer to the bearing so pushing the seal in too far causes it not contact the axle.

Note: I am no professional degrees in any field therefore I have no knowledge about anything. Take my postings with a grain of salt.


Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: New Ragusa screen door for sale Sold
Next Topic: Wanted : KEY TUMBLER AND KEY FOR DOOR ON 73 GMC
Goto Forum:
  


Current Time: Sun May 19 16:13:50 CDT 2024

Total time taken to generate the page: 0.00931 seconds