Home » Public Forums » GMCnet » Rear Wheel Seal
Re: [GMCnet] Rear Wheel Seal [message #325372 is a reply to message #325366] |
Tue, 24 October 2017 10:00 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma:
|
Senior Member |
|
|
G'day,
Bruce is correct; at the GMCMI Convention in Elkhart I bought a tool from him for $40.00 which seats the seals at the proper depth.
Dave is a VERY busy man; you can contact him on eight 1 zero - 6 five 3 - three 9 zero 2 but keep that in mind and don't tie him up
with idle chit chat!
Regards,
Rob M.
The Pedantic Mechanic
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
USA '77 Kingsley - TZE 267V100808
-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of Bruce Hislop
Sent: Tuesday, October 24, 2017 8:25 AM
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] Rear Wheel Seal
My understanding from Dave Lenzi with the rear seals, if you press them in flush with the hub the seal will be positioned too far
inward and will not seal on the axle. Do not press the seal all the way into the hub, leave it slightly proud of the hub and all is
good.
It is the front seals that can touch the bearing and get metal filings into the bearings.
Check with Dave Lenzi to be sure this is correct.
Bruce Hislop
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
Goto Forum:
Current Time: Sun May 19 14:40:45 CDT 2024
Total time taken to generate the page: 0.00837 seconds
|