GMCforum: GMCnet » Oil Filter Sandwich Plate O-Ring

Home » Public Forums » GMCnet » Oil Filter Sandwich Plate O-Ring

Show: Today's Messages :: Polls :: Message Navigator

Re: Oil Filter Sandwich Plate O-Ring [message #324929 is a reply to message #324928]

Fri, 13 October 2017 22:53

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma:

Senior Member

That i to 6 pound pressure differential bets ONLY is there is a 5 or 6 pound pressure differential between the inlet and outlet. That should only occur if there is a clog in the filter, lines, or cooler. That bypass will save your engine from oil starvation. The only time that should occur is if you have a very dirty filter or very thick oil.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

[Message index]

		Oil Filter Sandwich Plate O-Ring By: Ray Erspamer on Fri, 13 October 2017 08:15
		Re: Oil Filter Sandwich Plate O-Ring By: Jp Benson on Fri, 13 October 2017 08:33
		Re: Oil Filter Sandwich Plate O-Ring By: Ray Erspamer on Fri, 13 October 2017 21:46
		Re: Oil Filter Sandwich Plate O-Ring By: Ken Burton on Fri, 13 October 2017 22:53
		Re: Oil Filter Sandwich Plate O-Ring By: C Boyd on Fri, 13 October 2017 08:34
		Re: [GMCnet] Oil Filter Sandwich Plate O-Ring By: powerjon on Fri, 13 October 2017 08:38
		Re: Oil Filter Sandwich Plate O-Ring By: Ray Erspamer on Fri, 13 October 2017 08:40
		Re: Oil Filter Sandwich Plate O-Ring By: Larry on Sat, 14 October 2017 07:36
		Re: Oil Filter Sandwich Plate O-Ring By: tgeiger on Sat, 14 October 2017 08:27
		Re: [GMCnet] Oil Filter Sandwich Plate O-Ring By: bdub on Sat, 14 October 2017 10:02
		Re: Oil Filter Sandwich Plate O-Ring By: JohnL455 on Sat, 14 October 2017 08:46
		Re: Oil Filter Sandwich Plate O-Ring By: Larry on Sun, 15 October 2017 10:27
		Re: [GMCnet] Oil Filter Sandwich Plate O-Ring By: USAussie on Sun, 15 October 2017 16:35

Previous Topic:	[GMCnet] 2nd last cylinder doesn't receive spark
Next Topic:	Picture of a mounted Ragusa air scoop please.

Goto Forum:

-=] Back to Top [=-

Current Time: Fri May 17 23:06:41 CDT 2024

Total time taken to generate the page: 0.00551 seconds