GMCforum: GMCnet » Need used Hammond vent motor.

Home » Public Forums » GMCnet » Need used Hammond vent motor.

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Need used Hammond vent motor. [message #325252 is a reply to message #325237]

Sat, 21 October 2017 11:10

Kosier

Messages: 834
Registered: February 2008

Karma:

Senior Member

Ken,

I've got an original Hammond that came out of a real GMC. I checked it and
it runs fine.
Since I have everything except the lid, how much do you want? The rest goes
in the junk.

Gary Kosier
77PB w/500Cad
Newark, Ohio

--------------------------------------------------
From: "Ken Burton"
Sent: Saturday, October 21, 2017 2:08 AM
To:
Subject: Re: [GMCnet] Need used Hammond vent motor.

> Well I'm back with my original request. I have two of these that are not
> repairable due to internal rust and melted windings.
>
> I had two generous GMCers send me replacement motors, but they did not
> work. One was the wrong style motor and could not be mounted. The other
> one
> came out of a Royale and rotates backward. It is not easily reversable
> with out major surgery and I would probably destroy the motor. (Died in
> surgery)
>
> So I am back looking for anyone that might have a motor out of a used OEM
> Hammond roof vent. I had a pair of them that I gave away a few years
> back.
> Now I wish I would have kept one of them.
>
> I also ordered a new one off of the Internet only to find out it was 1"
> too tall and hit the top cover.
>
> If anyone has a removed / used one I sure could use it.
>
> Ken Burton
>
>
> Ken Burton wrote on Sat, 07 October 2017 10:39
>> Does anyone have a removed OEM roof vent they want to part with? I need
>> the motor only. I have three here that I have taken apart trying to get
>> enough parts to make one good one. All three have the same problem.
>> Water got into them and rusted the inside badly. Then they over heated
>> and
>> melted the winding insulation. I had one of these "fixed" and lubed the
>> bearings. I installed it and it ran for about 15 seconds before going up
>> in smoke.
>>
>> These ought to be available from people installing MAXX vent or Fantastic
>> vent upgrades if they have not thrown them away already.
>>
>> Thanks
>>
>> Ken Burton
>
>
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		Need used Hammond vent motor. By: Ken Burton on Sat, 07 October 2017 10:39
		Re: Need used Hammond vent motor. By: Ken Burton on Sat, 07 October 2017 11:04
		Re: Need used Hammond vent motor. By: tphipps on Sat, 07 October 2017 11:20
		Re: Need used Hammond vent motor. By: Ken Burton on Sat, 07 October 2017 11:32
		Re: Need used Hammond vent motor. By: Ken Burton on Sat, 07 October 2017 11:36
		Re: Need used Hammond vent motor. By: 77Royale on Sat, 07 October 2017 13:29
		Re: Need used Hammond vent motor. By: Ken Burton on Sat, 07 October 2017 13:47
		Re: Need used Hammond vent motor. By: Ken Burton on Sun, 15 October 2017 23:34
		Re: Need used Hammond vent motor. By: Ken Burton on Sat, 21 October 2017 01:08
		Re: [GMCnet] Need used Hammond vent motor. By: Kosier on Sat, 21 October 2017 11:10
		Re: [GMCnet] Need used Hammond vent motor. By: Ken Burton on Sun, 22 October 2017 02:42
		Re: [GMCnet] Need used Hammond vent motor. By: Bruce Hart on Sun, 22 October 2017 05:46
		Re: [GMCnet] Need used Hammond vent motor. By: mrgmc3 on Sun, 22 October 2017 07:50
		Re: [GMCnet] Need used Hammond vent motor. By: Ken Burton on Mon, 23 October 2017 02:15

Previous Topic:	New owner in central IL -- with questions, of course
Next Topic:	[GMCnet] Adding a service door for the spare tire

Goto Forum:

-=] Back to Top [=-

Current Time: Fri May 17 20:06:57 CDT 2024

Total time taken to generate the page: 0.00737 seconds