Restart a 403 [message #324596] |
Wed, 04 October 2017 01:24 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma:
|
Senior Member |
|
|
In the next few weeks I'm going to restart a GMC that has not run in 19 years. Other than changing the oil and filter and making sure the trans and coolant are full, what else? Belts, hoses, etc. will be taken care of after I get it running first. I am also thinking about pulling plugs and putting some oil in the cylinders.
I was thinking about pulling the distributor and running the oil pump with a drill. I have forgotten which way to turn it. I will check the advance weights for proper operation before reinstalling. Initial start up will be from a gas can and not the tanks.
Anything else?
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|