GMCforum: GMCnet » Restart a 403

Home » Public Forums » GMCnet » Restart a 403

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Restart a 403 [message #324601 is a reply to message #324598]

Wed, 04 October 2017 06:20

Kingsley Coach

Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada

Karma:

Senior Member

Oil in the cylinders...what Steve said .

Mike in NS

Virus-free.
www.avast.com

On Wed, Oct 4, 2017 at 6:24 AM, Steve Southworth
wrote:

> Pull the plugs and oil the cylinders.
>
> Take a wrench to the crank and turn it through at least two
> revolutions. If you don't insure the engine is free you could damage
> something if it is
> stuck. Ask me how I know how I got bent pushrods on mine. The starter
> has adequate torque to damage parts if they don't want to play well with
> others.
>
> Find #1 TDC and pulll the dist and run the oil pump.
>
> Then spin it with the starter while the plugs are out.
>
> TDC again and reinstall the distributor.
>
> The above is what I should have done. Not too bad after all as I found
> other problems that required a rebuild.
>
> This was on an engine that had been running two years prior to this and
> stored indoors.
> --
> Steve Southworth
> 1974 Glacier TZE064V100150 (for workin on)
> 1975 Transmode TZE365V100394 (parts & spares)
> Palmyra WI
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS

Life is too short to hold a grudge; slash some tires and call it even !
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		Restart a 403 By: Ken Burton on Wed, 04 October 2017 01:24
		Re: [GMCnet] Restart a 403 By: johnd01 on Wed, 04 October 2017 01:40
		Re: [GMCnet] Restart a 403 By: BobDunahugh on Wed, 04 October 2017 13:46
		Re: [GMCnet] Restart a 403 By: Sammy Williams on Wed, 04 October 2017 13:51
		Re: Restart a 403 By: midlf on Wed, 04 October 2017 04:24
		Re: [GMCnet] Restart a 403 By: Kingsley Coach on Wed, 04 October 2017 06:20
		Re: [GMCnet] Restart a 403 By: Ken Henderson on Wed, 04 October 2017 06:25
		Re: Restart a 403 By: Chris Tyler on Wed, 04 October 2017 07:51
		Re: Restart a 403 By: midlf on Wed, 04 October 2017 08:59
		Re: [GMCnet] Restart a 403 By: GMC.LES on Wed, 04 October 2017 09:52
		Re: [GMCnet] Restart a 403 By: James Hupy on Wed, 04 October 2017 10:01
		Re: [GMCnet] Restart a 403 By: emerystora on Wed, 04 October 2017 12:07
		Re: Restart a 403 By: JohnL455 on Wed, 04 October 2017 10:40
		Re: Restart a 403 By: Matt Colie on Wed, 04 October 2017 13:18

Previous Topic:	Need 403 Engine Help
Next Topic:	Caution with portable Propane type heaters

Goto Forum:

-=] Back to Top [=-

Current Time: Thu May 16 21:47:02 CDT 2024

Total time taken to generate the page: 0.03209 seconds