GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » porous aluminum tranny pan
Re: [GMCnet] porous aluminum tranny pan [message #324373 is a reply to message #324359] Tue, 26 September 2017 00:44 Go to previous messageGo to previous message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma:
Senior Member
If you purchased the pan from us , I will send you another one (new),N/C ,
that way it will be cleaner so if you desire to coat the onside, it will be
easier.
Contact us first so we can ship it to you first and have it ready to
install, then return the weeping one. We will credit you for the return
cost.
Since were the largest supplier for Ragusa, I will see how we might have it
coated at their facility.

On Mon, Sep 25, 2017 at 3:19 PM, Rob Mueller
wrote:

> Mike,
>
> I believe that these pans are sand cast and from my experience with
> Harley's sand cast pasts are porous and they weep.
>
> Make believe your GMC is like your Harley, it's not leaking it's marking
> its spot! ;-)
>
> Regards,
> Rob M.
> The Pedantic Mechanic
> Sydney, Australia
> AUS '75 Avion - The Blue Streak TZE365V100428
> USA '75 Avion - Double Trouble TZE365V100426
> USA '77 Kingsley - TZE 267V100808
>
> -----Original Message-----
> From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of Andy
> Sent: Monday, September 25, 2017 4:56 PM
> To: gmclist@list.gmcnet.org
> Subject: Re: [GMCnet] porous aluminum tranny pan
>
> I have been fighting this same issue for a year or so now. Kept thinking
> it must be weeping through the porous AL, but how could
> that be, Grrrrr, wonder if Jim will honor/swap these out.
>
> Where do I send the bill for many hours of RR, cleaning, gallons of tranny
> fluid?
> --
> 77 Kingsley
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>



--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Storage in Phoenix
Next Topic: High torque starter?
Goto Forum:
  


Current Time: Thu May 09 14:49:52 CDT 2024

Total time taken to generate the page: 0.01304 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software