GMCforum: GMCnet » porous aluminum tranny pan

Home » Public Forums » GMCnet » porous aluminum tranny pan

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] porous aluminum tranny pan [message #324305 is a reply to message #324304]

Sun, 24 September 2017 09:49

Ken Henderson

Messages: 8726
Registered: March 2004
Location: Americus, GA

Karma:

Senior Member

Thanks for that experienced report, Justin. I'll try ATF. In fact, I'll
go ahead and drain the transmission into the "new" pan and let it set until
I'm ready to refill before the next trip in a couple of weeks. If it looks
"iffy", I'll keep the old pan (which is one of the Toronado tow option pans
with fore-aft tubes through the bottom for cooling).

Ken H.

On Sun, Sep 24, 2017 at 10:43 AM, Justin Brady wrote:

> If you fill the pan with gas you'll likely have no paint in the morning.
> Duplicolor engine enamel is great stuff but long term gas exposure is an
> issue. I've had it flake off of properly prepared engines when the carb
> starts leaking heavily. (motorcycle)
>
> I'd fill it with atf, since that's all it's going to see and let it sit
> for a week or so and check it out.
> --
> Justin Brady
> http://www.thegmcrv.com/
> 1976 Palm Beach 455
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach

Report message to a moderator

[Message index]

		porous aluminum tranny pan By: KB on Thu, 21 September 2017 23:02
		Re: [GMCnet] porous aluminum tranny pan By: Mr ERFisher on Fri, 22 September 2017 04:33
		Re: [GMCnet] porous aluminum tranny pan By: Grrumpy on Fri, 22 September 2017 17:49
		Re: [GMCnet] porous aluminum tranny pan By: USAussie on Fri, 22 September 2017 07:18
		Re: porous aluminum tranny pan By: jricke on Fri, 22 September 2017 08:22
		Re: porous aluminum tranny pan By: Justin Brady on Fri, 22 September 2017 08:29
		Re: porous aluminum tranny pan By: jhbridges on Fri, 22 September 2017 08:48
		Re: porous aluminum tranny pan By: TR 1 on Fri, 22 September 2017 09:09
		Re: [GMCnet] porous aluminum tranny pan By: James Hupy on Fri, 22 September 2017 09:32
		Re: [GMCnet] porous aluminum tranny pan By: KB on Fri, 22 September 2017 11:07
		Re: [GMCnet] porous aluminum tranny pan By: Kosier on Fri, 22 September 2017 11:57
		Re: [GMCnet] porous aluminum tranny pan By: Ken Henderson on Fri, 22 September 2017 12:26
		Re: [GMCnet] porous aluminum tranny pan By: richshoop on Sat, 23 September 2017 00:15
		Re: [GMCnet] porous aluminum tranny pan By: James Hupy on Sat, 23 September 2017 09:22
		Re: [GMCnet] porous aluminum tranny pan By: Ken Henderson on Sat, 23 September 2017 21:58
		Re: [GMCnet] porous aluminum tranny pan By: James Hupy on Sun, 24 September 2017 00:05
		Re: [GMCnet] porous aluminum tranny pan By: KB on Sun, 24 September 2017 18:08
		Re: [GMCnet] porous aluminum tranny pan By: Matt Colie on Sun, 24 September 2017 18:35
		Re: [GMCnet] porous aluminum tranny pan By: KB on Sun, 24 September 2017 20:53
		Re: [GMCnet] porous aluminum tranny pan By: Matt Colie on Mon, 25 September 2017 08:42
		Re: [GMCnet] porous aluminum tranny pan By: powerjon on Sun, 24 September 2017 09:10
		Re: [GMCnet] porous aluminum tranny pan By: Justin Brady on Sun, 24 September 2017 09:43
		Re: [GMCnet] porous aluminum tranny pan By: Ken Henderson on Sun, 24 September 2017 09:49
		Re: [GMCnet] porous aluminum tranny pan By: USAussie on Sun, 24 September 2017 16:43
		Re: [GMCnet] porous aluminum tranny pan By: Adrien G. on Sun, 24 September 2017 22:03
		Re: [GMCnet] porous aluminum tranny pan By: USAussie on Fri, 22 September 2017 16:02
		Re: [GMCnet] porous aluminum tranny pan By: Jim Miller on Fri, 22 September 2017 17:06
		Re: [GMCnet] porous aluminum tranny pan By: KB on Fri, 22 September 2017 17:15
		Re: [GMCnet] porous aluminum tranny pan By: KB on Fri, 22 September 2017 17:31
		Re: [GMCnet] porous aluminum tranny pan By: USAussie on Fri, 22 September 2017 21:00
		Re: porous aluminum tranny pan By: KB on Fri, 22 September 2017 11:01
		Re: porous aluminum tranny pan By: TR 1 on Fri, 22 September 2017 11:26
		Re: porous aluminum tranny pan By: Chris Tyler on Sun, 24 September 2017 05:10
		Re: porous aluminum tranny pan By: Aaron on Sun, 24 September 2017 19:30
		Re: [GMCnet] porous aluminum tranny pan By: k2gkk on Sun, 24 September 2017 19:49
		Re: [GMCnet] porous aluminum tranny pan By: KB on Sun, 24 September 2017 21:18
		Re: [GMCnet] porous aluminum tranny pan By: midlf on Mon, 25 September 2017 08:55
		Re: [GMCnet] porous aluminum tranny pan By: KB on Mon, 25 September 2017 10:13
		Re: [GMCnet] porous aluminum tranny pan By: Dennis S on Mon, 25 September 2017 11:18
		Re: [GMCnet] porous aluminum tranny pan By: Dennis S on Mon, 25 September 2017 11:21
		Re: [GMCnet] porous aluminum tranny pan By: midlf on Tue, 26 September 2017 03:42
		Re: [GMCnet] porous aluminum tranny pan By: Ken Henderson on Mon, 25 September 2017 08:33
		Re: [GMCnet] porous aluminum tranny pan By: Ken Henderson on Tue, 26 September 2017 08:31
		Re: porous aluminum tranny pan By: Aaron on Mon, 25 September 2017 11:04
		Re: porous aluminum tranny pan By: dr.diesel on Mon, 25 September 2017 16:55
		Re: [GMCnet] porous aluminum tranny pan By: USAussie on Mon, 25 September 2017 17:19
		Re: [GMCnet] porous aluminum tranny pan By: jimk on Tue, 26 September 2017 00:44
		Re: porous aluminum tranny pan By: KB on Fri, 17 November 2017 15:48
		Re: [GMCnet] porous aluminum tranny pan By: Kingsley Coach on Fri, 17 November 2017 18:58
		Re: [GMCnet] porous aluminum tranny pan By: Ken Henderson on Fri, 17 November 2017 19:55
		Re: [GMCnet] porous aluminum tranny pan By: jimk on Fri, 17 November 2017 20:16
		Re: [GMCnet] porous aluminum tranny pan By: Larry on Fri, 17 November 2017 20:26
		Re: [GMCnet] porous aluminum tranny pan By: richshoop on Sat, 18 November 2017 11:26
		Re: [GMCnet] porous aluminum tranny pan By: KB on Sat, 18 November 2017 14:52
		Re: [GMCnet] porous aluminum tranny pan By: tphipps on Sat, 18 November 2017 16:38
		Re: porous aluminum tranny pan By: Larry on Fri, 17 November 2017 21:08
		Re: [GMCnet] porous aluminum tranny pan By: Ken Henderson on Sat, 18 November 2017 19:13

Previous Topic:	Storage in Phoenix
Next Topic:	High torque starter?

Goto Forum:

-=] Back to Top [=-

Current Time: Thu May 09 08:20:09 CDT 2024

Total time taken to generate the page: 0.01817 seconds