GMCforum: GMCnet » porous aluminum tranny pan

Home » Public Forums » GMCnet » porous aluminum tranny pan

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] porous aluminum tranny pan [message #324226 is a reply to message #324195]

Fri, 22 September 2017 17:06

Jim Miller

Messages: 501
Registered: March 2008

Karma:

Senior Member

On Sep 22, 2017, at 12:07 PM, KB wrote:

> The only problem with the glyptal is it's insulating.

Glyptal is an *electrically* insulating coating that was developed to coat parts that operate at high voltages such as in transformers, motors, generators or other electrical gear. “Insulating” - at least in terms of glyptal - refers to its electrical properties and not its thermal properties. A mm-thick or so coating isn’t going to make any difference at all in the ATF temperature.

And I, too have had an uncoated Ragusa pan that weeped ATF. JimK sent me another one that did not weep.

I would not hesitate for a second to coat the inside of a new tranny pan with Glyptal - it is used inside of engines fairly often.

Jim Miller
1977 Eleganza
1977 Royale
Hamilton, OH

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Jim Miller 1977 Eleganza II 1977 Royale Hamilton, OH

Report message to a moderator

[Message index]

		porous aluminum tranny pan By: KB on Thu, 21 September 2017 23:02
		Re: [GMCnet] porous aluminum tranny pan By: Mr ERFisher on Fri, 22 September 2017 04:33
		Re: [GMCnet] porous aluminum tranny pan By: Grrumpy on Fri, 22 September 2017 17:49
		Re: [GMCnet] porous aluminum tranny pan By: USAussie on Fri, 22 September 2017 07:18
		Re: porous aluminum tranny pan By: jricke on Fri, 22 September 2017 08:22
		Re: porous aluminum tranny pan By: Justin Brady on Fri, 22 September 2017 08:29
		Re: porous aluminum tranny pan By: jhbridges on Fri, 22 September 2017 08:48
		Re: porous aluminum tranny pan By: TR 1 on Fri, 22 September 2017 09:09
		Re: [GMCnet] porous aluminum tranny pan By: James Hupy on Fri, 22 September 2017 09:32
		Re: [GMCnet] porous aluminum tranny pan By: KB on Fri, 22 September 2017 11:07
		Re: [GMCnet] porous aluminum tranny pan By: Kosier on Fri, 22 September 2017 11:57
		Re: [GMCnet] porous aluminum tranny pan By: Ken Henderson on Fri, 22 September 2017 12:26
		Re: [GMCnet] porous aluminum tranny pan By: richshoop on Sat, 23 September 2017 00:15
		Re: [GMCnet] porous aluminum tranny pan By: James Hupy on Sat, 23 September 2017 09:22
		Re: [GMCnet] porous aluminum tranny pan By: Ken Henderson on Sat, 23 September 2017 21:58
		Re: [GMCnet] porous aluminum tranny pan By: James Hupy on Sun, 24 September 2017 00:05
		Re: [GMCnet] porous aluminum tranny pan By: KB on Sun, 24 September 2017 18:08
		Re: [GMCnet] porous aluminum tranny pan By: Matt Colie on Sun, 24 September 2017 18:35
		Re: [GMCnet] porous aluminum tranny pan By: KB on Sun, 24 September 2017 20:53
		Re: [GMCnet] porous aluminum tranny pan By: Matt Colie on Mon, 25 September 2017 08:42
		Re: [GMCnet] porous aluminum tranny pan By: powerjon on Sun, 24 September 2017 09:10
		Re: [GMCnet] porous aluminum tranny pan By: Justin Brady on Sun, 24 September 2017 09:43
		Re: [GMCnet] porous aluminum tranny pan By: Ken Henderson on Sun, 24 September 2017 09:49
		Re: [GMCnet] porous aluminum tranny pan By: USAussie on Sun, 24 September 2017 16:43
		Re: [GMCnet] porous aluminum tranny pan By: Adrien G. on Sun, 24 September 2017 22:03
		Re: [GMCnet] porous aluminum tranny pan By: USAussie on Fri, 22 September 2017 16:02
		Re: [GMCnet] porous aluminum tranny pan By: Jim Miller on Fri, 22 September 2017 17:06
		Re: [GMCnet] porous aluminum tranny pan By: KB on Fri, 22 September 2017 17:15
		Re: [GMCnet] porous aluminum tranny pan By: KB on Fri, 22 September 2017 17:31
		Re: [GMCnet] porous aluminum tranny pan By: USAussie on Fri, 22 September 2017 21:00
		Re: porous aluminum tranny pan By: KB on Fri, 22 September 2017 11:01
		Re: porous aluminum tranny pan By: TR 1 on Fri, 22 September 2017 11:26
		Re: porous aluminum tranny pan By: Chris Tyler on Sun, 24 September 2017 05:10
		Re: porous aluminum tranny pan By: Aaron on Sun, 24 September 2017 19:30
		Re: [GMCnet] porous aluminum tranny pan By: k2gkk on Sun, 24 September 2017 19:49
		Re: [GMCnet] porous aluminum tranny pan By: KB on Sun, 24 September 2017 21:18
		Re: [GMCnet] porous aluminum tranny pan By: midlf on Mon, 25 September 2017 08:55
		Re: [GMCnet] porous aluminum tranny pan By: KB on Mon, 25 September 2017 10:13
		Re: [GMCnet] porous aluminum tranny pan By: Dennis S on Mon, 25 September 2017 11:18
		Re: [GMCnet] porous aluminum tranny pan By: Dennis S on Mon, 25 September 2017 11:21
		Re: [GMCnet] porous aluminum tranny pan By: midlf on Tue, 26 September 2017 03:42
		Re: [GMCnet] porous aluminum tranny pan By: Ken Henderson on Mon, 25 September 2017 08:33
		Re: [GMCnet] porous aluminum tranny pan By: Ken Henderson on Tue, 26 September 2017 08:31
		Re: porous aluminum tranny pan By: Aaron on Mon, 25 September 2017 11:04
		Re: porous aluminum tranny pan By: dr.diesel on Mon, 25 September 2017 16:55
		Re: [GMCnet] porous aluminum tranny pan By: USAussie on Mon, 25 September 2017 17:19
		Re: [GMCnet] porous aluminum tranny pan By: jimk on Tue, 26 September 2017 00:44
		Re: porous aluminum tranny pan By: KB on Fri, 17 November 2017 15:48
		Re: [GMCnet] porous aluminum tranny pan By: Kingsley Coach on Fri, 17 November 2017 18:58
		Re: [GMCnet] porous aluminum tranny pan By: Ken Henderson on Fri, 17 November 2017 19:55
		Re: [GMCnet] porous aluminum tranny pan By: jimk on Fri, 17 November 2017 20:16
		Re: [GMCnet] porous aluminum tranny pan By: Larry on Fri, 17 November 2017 20:26
		Re: [GMCnet] porous aluminum tranny pan By: richshoop on Sat, 18 November 2017 11:26
		Re: [GMCnet] porous aluminum tranny pan By: KB on Sat, 18 November 2017 14:52
		Re: [GMCnet] porous aluminum tranny pan By: tphipps on Sat, 18 November 2017 16:38
		Re: porous aluminum tranny pan By: Larry on Fri, 17 November 2017 21:08
		Re: [GMCnet] porous aluminum tranny pan By: Ken Henderson on Sat, 18 November 2017 19:13

Previous Topic:	Storage in Phoenix
Next Topic:	High torque starter?

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Nov 10 13:17:47 CST 2024

Total time taken to generate the page: 0.02541 seconds