GMCforum: GMCnet » [GMCnet] V-Belt Tensioning Jack

Home » Public Forums » GMCnet » [GMCnet] V-Belt Tensioning Jack

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] V-Belt Tensioning Jack [message #324140 is a reply to message #324122]

Thu, 21 September 2017 15:43

jricke

Messages: 29
Registered: June 2007
Location: Arden Hills, MN

Karma:

Junior Member

I have one.

Yes, it has a threaded section. Wrench on the hex section to extend or retract.

Saddle also broke off of mine. Very weak resistance weld at point of cone to the saddle. MIG welded the saddles on and now it works fine (just not as pretty).

Joe Ricke - KE0CPM
Arden Hills, MN
'77 Transmode

Report message to a moderator

[Message index]

		[GMCnet] V-Belt Tensioning Jack By: Ken Henderson on Thu, 21 September 2017 12:22
		Re: [GMCnet] V-Belt Tensioning Jack By: Ken Henderson on Thu, 21 September 2017 14:45
		Re: [GMCnet] V-Belt Tensioning Jack By: Justin Brady on Thu, 21 September 2017 15:09
		Re: [GMCnet] V-Belt Tensioning Jack By: midlf on Thu, 21 September 2017 15:33
		Re: [GMCnet] V-Belt Tensioning Jack By: Ethan James on Thu, 21 September 2017 15:37
		Re: [GMCnet] V-Belt Tensioning Jack By: jricke on Thu, 21 September 2017 15:43
		Re: [GMCnet] V-Belt Tensioning Jack By: Jp Benson on Thu, 21 September 2017 20:43

Previous Topic:	BAD FRIDGE/FREEZER : HELP
Next Topic:	[GMCnet] 4.8 MPG

Goto Forum:

-=] Back to Top [=-

Current Time: Thu May 16 03:26:44 CDT 2024

Total time taken to generate the page: 0.01167 seconds