GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Needed: Walbro Carb
Re: [GMCnet] Needed: Walbro Carb [message #323956 is a reply to message #323951] Sun, 17 September 2017 16:06 Go to previous messageGo to previous message
USAussie is currently offline  USAussie   United States
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma:
Senior Member
Jerry,

I have a rebuilt one which you can have; unfortunately it is in Australia and I don't get back until December 13th.

If you can wait I'll ship it to you FOC since you're a nice guy! :-)

Regards,
Rob M.
The Pedantic Mechanic
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
USA '77 Kingsley - TZE 267V100808

-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of Jerry Sitzlar via Gmclist
Sent: Sunday, September 17, 2017 12:59 PM
To: gmclist@list.gmcnet.org
Cc: Jerry Sitzlar
Subject: Re: [GMCnet] Needed: Walbro Carb

I have rebuilt many carburetors throughout the years, so that is not the issue. When my Onan started running way too rich, I
ordered a rebuild kit from Jim K. I found several issues with my carb when I removed it, including several patch areas of epoxy on
the body (?), a nozzle boss that looked like it had seen better days, a ground off idle screw, a bent float, etc. I have a NOS
Walbro LMB carb, that I cannibalised to get a new float. The
NOS carb did not have the same jetting etc, that the Onan employs so I could not use that carb. I put in a new idle screw and the
repair kit, installed the carb back onto the Onan and it started and ran, but it is still too rich and cannot be adjusted at the
idle screw. The power screw adjusts great. The Onan puts out the correct voltage and frequency at load and no load. The idle
smooths out a little whenever the filter is removed (new filter) and the carbon is removed from the new spark plugs.

I believe there is internal damage in my carb and it cannot be rebuilt. If I can buy a used carb from someone at a reasonable price
I may be able to rebuild and use it or use it as a core for a Jim K unit.

Thanks,
Jerry


_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Gauges
Next Topic: For Sale at Copart
Goto Forum:
  


Current Time: Tue May 14 01:56:07 CDT 2024

Total time taken to generate the page: 0.02918 seconds