GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Well. Now it won't start.
Re: [GMCnet] Well. Now it won't start. [message #323486 is a reply to message #323484] Thu, 07 September 2017 00:32 Go to previous messageGo to previous message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma:
Senior Member
​BoB, Check your distributor connection to the ECM.
If it does not receive the signal that the engine is turning, it will not
inject.
Distributor cap needs to have a new plastic clip to keep from falling off.​

On Wed, Sep 6, 2017 at 10:25 PM Bob Dunahugh wrote:

> Looked at the injectors. No gas. Pump pressure at 9 PSI. Maybe pressure
> regulator is bypassing too much gas. Clamped off bypass hose. No change.
> Got pissed off. Went in the house for some Scotch. So tomorrow I'm putting
> a hose from the pump. Into a gas can. Maybe the socks in the tanks are part
> of my problem. BUT. Why did it run great an hour before? Need more
> Scotch. Bob Dunahugh
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org


Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
 
Read Message
Read Message
Read Message
Previous Topic: Has anyone installed the sanden AC compressor kit from Applied?
Next Topic: [GMCnet] Whiny Stereo
Goto Forum:
  


Current Time: Sun May 12 07:44:10 CDT 2024

Total time taken to generate the page: 0.00737 seconds