Re: [GMCnet] MY EFI WORKS. [message #323430] |
Wed, 06 September 2017 01:10 |
James Hupy
Messages: 6806 Registered: May 2010
Karma:
|
Senior Member |
|
|
Bob, I remove the filler neck pipe to avoid metal shavings entering the
fuel system. Others coat their cutting tools in heavy grease and trap them.
I drill a small hole, then use a tapered punch to enlarge it to tap drill
size. Gives a bit more meat to tap for the bung. One could also braze a nut
onto the filler neck OFF OF THE COACH. JWID.
Jim Hupy
On Sep 5, 2017 10:04 PM, "Bob Dunahugh" wrote:
Thank you to Randy Van Winkle for his help with my installation, and ECM
efforts. Then there was Emery Stora, and Ken Henderson. And yes Randy. I
have a small leak were the fuel line is taped into the gas fill pipe. So
now I need to test drive Wed. Bob Dunahugh 78 Royale
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|