GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Has anyone installed the sanden AC compressor kit from Applied?
Re: [GMCnet] Has anyone installed the sanden AC compressor kit from Applied? [message #323217 is a reply to message #323215] Sat, 02 September 2017 20:38 Go to previous messageGo to previous message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma:
Senior Member
Scott,
We need to mock up the unit as a change was made about a year ago and we
did not edit the instructions.
Just because our guys can install them easily does not mean much, so we
need to get on it now.
Scott, I'll issue some credit on your account.

On Sat, Sep 2, 2017 at 6:17 PM, Scott Nutter wrote:

> Has anyone installed the Sanden AC compressor and bracket /hose kit from
> Applied for the *455*? I put mine in today, but it's not even close to how
> the Sanden people recommend the install. They were showing spacers all
> over, but on my install I only used one spacer. Also they showed the tension
> bracket on the other side of the compressor than that is shown on the
> Applied website. But this must be GMC specific.
>
> Everything is hooked up, but I haven't ran the engine yet to make sure the
> belts don't spin off. And I'm not going to spin up the clutch until I get
> freon in it.
> So I quess I'm looking for someone who has already installed the kit, to
> make sure I haven't screwed up the install. Spacers? Or tension bracket
> placement.
>
> To me it looks to be a big improvement ovet the A6 unit that I had to
> replace 2 times over the last 3 years. And with this redesigned bracket, I
> can
> actually change out the valve cover gaskets without pulling off the AC
> bracket and compressor!
>
> Thanks,
> Scott.
> --
> Scott Nutter
> 1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final
> drive, Quad bags, tankless water heater, everything Lenzi.
> Houston, Texas
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>



--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Paging Shadrach Smith from Vermont
Next Topic: [GMCnet] Well. Now it won't start.
Goto Forum:
  


Current Time: Sun May 12 13:45:42 CDT 2024

Total time taken to generate the page: 0.00760 seconds