GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Firestone bag replacement ( Nut on smart end )
Re: Firestone bag replacement [message #323246 is a reply to message #323197] Sun, 03 September 2017 08:56 Go to previous messageGo to previous message
JohnL455 is currently offline  JohnL455   United States
Messages: 4447
Registered: October 2006
Location: Woodstock, IL
Karma:
Senior Member
I was thinking of reassembling w old air spring and a box end wrench captive installed before air line. With normal ride height will that hold the spud from spinning if I use an extension on the box wrench? Due to the arm casting I don't think a nut splitter will get in there. On the bright side, this is a good PM event in the barn compared to on side of road where a 30min job would not be possible and be very dangerous.

John Lebetski
Woodstock, IL
77 Eleganza II

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] New Air coolent
Next Topic: [GMCnet] Starting problem
Goto Forum:
  


Current Time: Tue May 14 13:36:00 CDT 2024

Total time taken to generate the page: 0.02803 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software