GMCforum: GMCnet » [GMCnet] &@":'#^>#! Mice!

Home » Public Forums » GMCnet » [GMCnet] &@":'#^>#! Mice!

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] &@":'#^>#! Mice! [message #323221 is a reply to message #323214]

Sat, 02 September 2017 21:43

Ken Henderson

Messages: 8726
Registered: March 2004
Location: Americus, GA

Karma:

Senior Member

Rick,

I see no reason you can't do final wheel alignment without the half-shaft.
After all, it is "independent" suspension. :-)

I know, you'll want to check it with EVERYTHING in place, but don't do a
slap-dash job of the "quick initial set" and you may find no touch-up
needed.

Good luck with that throat!

Ken H.

On Sat, Sep 2, 2017 at 9:06 PM, Richard Denney wrote:

> Hopefully I'll make it to Elkhart. Getting the tanks up shouldn't be a
> problem--I have all the stuff now. I still need to route and attach front
> brake lines, bleed the brakes, and then I can drop the coach and do the
> ride height and alignment. But I also still need the intermediate shaft
> that Manny is sending me, but that hasn't yet arrived. I need that before I
> can fasten the half-shafts on the inner end, so I can't do the alignment
> until I get that done, beyond a quick initial set.
>
> But I have to travel this coming week and my weekend coming up is a bit
> crowded with other activities. I'm hoping to get as much buttoned up as I
> can by Monday afternoon. The scratchy throat today has me worried, though.
>
> Rick "who really tried to keep this from being a last-minute thing" Denney
>
> On Sat, Sep 2, 2017 at 8:41 PM, Bruce Hislop wrote:
>
>> Buddy the K9Dog, keeps them at bay, with the help of Mixy the cat.
>> Haven't seen any evidence of of any varmen in the garage-mahall yet.
>>
>> http://www.gmcmhphotos.com/photos/the-murray-gets-a-home/
>> p55071-imgp6322-small.html
>>
>> He's planning on coming to Elkhart to be on guard 24/7.
>>
>> --
>> Bruce Hislop
>> ON Canada
>> 77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
>> Hubler 1 ton front end
>> http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
>> My Staff says I never listen to them, or something like that
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
>
> --
> '73 X-Glacier 230 "Jaws"
> Northern Virginia
> Offlist email: rick at rickdenney dot com
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach

Report message to a moderator

[Message index]

		[GMCnet] &@":'#^>#! Mice! By: Richard Denney on Fri, 01 September 2017 18:04
		Re: [GMCnet] &@":'#^>#! Mice! By: Harry on Fri, 01 September 2017 22:11
		Re: [GMCnet] &@":'#^>#! Mice! By: Richard Denney on Fri, 01 September 2017 22:32
		Re: [GMCnet] &@":'#^>#! Mice! By: k2gkk on Sat, 02 September 2017 10:33
		Re: [GMCnet] &@":'#^>#! Mice! By: Sandra Price on Sat, 02 September 2017 11:23
		Re: [GMCnet] &@":'#^>#! Mice! By: jimk on Sat, 02 September 2017 09:54
		Re: [GMCnet] &@":'#^>#! Mice! By: Emery Stora on Sat, 02 September 2017 10:23
		Re: [GMCnet] &@":'#^>#! Mice! By: Richard Denney on Sat, 02 September 2017 13:50
		Re: [GMCnet] &@":'#^>#! Mice! By: emerystora on Sat, 02 September 2017 14:00
		Re: [GMCnet] &@":'#^>#! Mice! By: Richard Denney on Sat, 02 September 2017 15:51
		Re: [GMCnet] &@":'#^>#! Mice! By: Emery Stora on Sat, 02 September 2017 16:13
		Re: [GMCnet] &@":'#^>#! Mice! By: Richard Denney on Sat, 02 September 2017 16:39
		Re: [GMCnet] &@":'#^>#! Mice! By: RF_Burns on Sat, 02 September 2017 19:41
		Re: [GMCnet] &@":'#^>#! Mice! By: Richard Denney on Sat, 02 September 2017 20:06
		Re: [GMCnet] &@":'#^>#! Mice! By: Ken Henderson on Sat, 02 September 2017 21:43
		Re: [GMCnet] &@":'#^>#! Mice! By: Richard Denney on Sat, 02 September 2017 22:14
		Re: [GMCnet] &@":'#^>#! Mice! By: Richard Denney on Sat, 02 September 2017 22:15
		Re: [GMCnet] &@":'#^>#! Mice! By: Matt Colie on Sun, 03 September 2017 08:03
		Re: [GMCnet] &@":'#^>#! Mice! By: Ken Henderson on Sun, 03 September 2017 11:08
		Re: [GMCnet] &@":'#^>#! Mice! By: <rallymaster on Sun, 03 September 2017 22:14
		Re: [GMCnet] &@":'#^>#! Mice! By: Richard Denney on Mon, 04 September 2017 21:19
		Re: [GMCnet] &@":'#^>#! Mice! By: Ken Henderson on Mon, 04 September 2017 22:24
		Re: [GMCnet] &@":'#^>#! Mice! By: Richard Denney on Sat, 09 September 2017 15:00
		Re: [GMCnet] &@":'#^>#! Mice! By: GatsbysCruise on Tue, 05 September 2017 13:27
		Re: [GMCnet] &@":'#^>#! Mice! By: jhbridges on Tue, 05 September 2017 14:27
		Re: [GMCnet] &@":'#^>#! Mice! By: Richard Denney on Mon, 11 September 2017 22:59
		Re: [GMCnet] &@":'#^>#! Mice! By: Matt Colie on Tue, 12 September 2017 07:58
		Re: [GMCnet] &@":'#^>#! Mice! By: Richard Denney on Tue, 12 September 2017 09:25
		Re: [GMCnet] &@":'#^>#! Mice! By: Mr ERFisher on Tue, 12 September 2017 11:39
		Re: [GMCnet] &@":'#^>#! Mice! By: Richard Denney on Tue, 12 September 2017 12:28
		Re: [GMCnet] &@":'#^>#! Mice! By: Matt Colie on Tue, 12 September 2017 16:38
		Re: [GMCnet] &@":'#^>#! Mice! By: Richard Denney on Wed, 13 September 2017 10:20
		Re: [GMCnet] &@":'#^>#! Mice! By: Matt Colie on Wed, 13 September 2017 16:25
		Re: [GMCnet] &@":'#^>#! Mice! By: James Hupy on Wed, 13 September 2017 17:07
		Re: [GMCnet] &@":'#^>#! Mice! By: Richard Denney on Thu, 14 September 2017 21:55
		Re: [GMCnet] &@":'#^>#! Mice! By: Ken Henderson on Thu, 14 September 2017 22:09
		Re: [GMCnet] &@":'#^>#! Mice! By: Richard Denney on Thu, 14 September 2017 22:51

Previous Topic:	[GMCnet] Desperatly need part number for brake light switch for a 78
Next Topic:	Oseola, WI Wings and Wheels event last weekend.

Goto Forum:

-=] Back to Top [=-

Current Time: Sun May 05 04:58:00 CDT 2024

Total time taken to generate the page: 0.00842 seconds